Not sure if I should post this here or under the modem section, but having an issue with my router where after booting up, I get a message that there is no modem present.
After emailing with one of the admins at The Wireless Haven, they advised that I should upgrade to latest firmware without keeping the configuration settings. After flashing firmware 3 times per guidance, still getting the same message.
Totally lost on where to go and hoping that an The Wireless Haven admin can chime in on how I should go about troubleshooting.
Issue with NEXQ6GO-U Router and Quactel Modem
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Issue with NEXQ6GO-U Router and Quactel Modem
Does the modem show up on the debug screen (bottom part) or in the system log?
Re: Issue with NEXQ6GO-U Router and Quactel Modem
No mention of router under Debug information. The system log has several references to modem, but not really sure what I am looking for.Didneywhorl wrote: Wed Oct 13, 2021 10:21 am Does the modem show up on the debug screen (bottom part) or in the system log?
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Issue with NEXQ6GO-U Router and Quactel Modem
Post the logs here if you have them. A text file attachment works, or just quote the text in full. Maybe the Kernel log too.
Re: Issue with NEXQ6GO-U Router and Quactel Modem
Here is the debug information. Sytem Logs and Kernel Logs attached.Didneywhorl wrote: Wed Oct 13, 2021 5:41 pm Post the logs here if you have them. A text file attachment works, or just quote the text in full. Maybe the Kernel log too.
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 4.09
S: Manufacturer=Linux 4.9.211 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
You do not have the required permissions to view the files attached to this post.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Issue with NEXQ6GO-U Router and Quactel Modem
Thats it?
There should be one call USB Hub or something. That's what the modem uses on these modems, the USB bus.
Nothing in the debug about USB?
There should be one call USB Hub or something. That's what the modem uses on these modems, the USB bus.
Nothing in the debug about USB?
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: Issue with NEXQ6GO-U Router and Quactel Modem
Ill look through your logs when I get a min to sit down at my pc.
Re: Issue with NEXQ6GO-U Router and Quactel Modem
thank you!Didneywhorl wrote: Thu Oct 14, 2021 10:41 am Ill look through your logs when I get a min to sit down at my pc.
