I've been using this wg3526 without issues for about 6 months. However, in the last few weeks, the WiFi would go away; it would come back with a power-cycle.
Now, after a power-cycle, the red SYS light comes on, and the 3G/4G light, but that is all. The ethernet ports never light up.
My bench power supply reports the same consumption as normal.
I tried resetting the modem, with the instructions here.
The ethernet ports never become active, however, so I can't go to 192.168.1.1.
To troubleshoot, I took out the modem (EM7411) and adapter. As expected, this didn't change the behavior.
Is there anything else I can try?
73,
Chuck, N1SPX
WG3526 stopped responding
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
- Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: WG3526 stopped responding
Did you try reflashing the firmware?
http://wirelessjoint.com/viewtopic.php?f=21&t=2051
http://wirelessjoint.com/viewtopic.php?f=21&t=2051