Troubleshooting Mofi 4500 SIM4 signal

[AlteredLogic]

Hello all, I was looking at my mofi 4500 status page and saw some rather large numbers and I just wanted to check and see with you all if there is an issue with the device or maybe the yagi mimo antenna outside or the LMR400 cables. My latest speed test is 41ms ping 16.74mbps Down and 1.50mbps Up. My signal strength is -115 dBm, signal quality is -11.3, Diversity signal strength is -114 dBm, RSRQ -107, RSRP -1125, RSSI -823, and the router is advanced band locked with B4 and B13 on Verizon Wireless prepaid (unlimited data jetpack prepaid plan, data only). Thank you for your help in advance, I compete in Call of Duty and I'm having bullet registration issues along with ping spikes (60-120ms ping) but for the most part Verizon has been pretty solid for me and I just wanted to see if there is something I'm missing or doing wrong that I can change to make things better.

[Didneywhorl]

Run the AT command AT!GSTATUS? and tell us what it outputs.

[AlteredLogic]

Hello Didneywhorl, I have no idea how to bring that up and run that, I have the mofi firmware and I didn't find an area where I can type that command in.

[Didneywhorl]

Unfortunately I'm not a MOFI user, so I don;t know exactly where it is. I think its called "Modem Commands" or something.
....
Here is another post that talks about the commands actually: https://wirelessjoint.com/viewtopic.php?t=263

[AlteredLogic]

I looked through the thread, seems too much of a hassle and it doesn't seem very clear either. I appreciate you trying to help and I guess I'll never know if there is a problem or not. This is what I found, I don't want to install a different firmware either https://wirelessjoint.com/viewtopic.php?f=8& ... nds#p18820

[Didneywhorl]

Shoot MOFI a message and ask them where you enter AT commands.