Hi guys,
I'm trying to send AT commands to mofi4500 v4 with MC7455 modem in it.
I was following tutorial: https://wirelessjoint.com/viewtopic.php?t=33 but so far no luck
SO far what I did:
1. I installed USB drivers for for MC7455 to recognize my modem link
2. Downloaded latest airPrime airPrime
After running Airprime I saw something went wrong.. I attached a picture. Also in device manager I don't see that modem was detected.
What are my next step would be? Advices?
Thank you all in advance
How to connect mofi4500 and sent AT commands
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: How to connect mofi4500 and sent AT commands
You have to have the modem in a USB adapter to update via windows .exe file.
After installing the windows drivers, leave the modem (installed in a USB adapter) plugged into your pc's usb and reboot the PC.
Then when it comes back up, unplug the modem and plug it back in. Then open the windows device manager and look for the modem to load up. It should show up under Modems.
Then you should be able to run the update file from Sierra.
Adapter: https://thewirelesshaven.com/shop/pcie-m-2/mini-p ... card-slot/
After installing the windows drivers, leave the modem (installed in a USB adapter) plugged into your pc's usb and reboot the PC.
Then when it comes back up, unplug the modem and plug it back in. Then open the windows device manager and look for the modem to load up. It should show up under Modems.
Then you should be able to run the update file from Sierra.
Adapter: https://thewirelesshaven.com/shop/pcie-m-2/mini-p ... card-slot/
