This is a WG3526-P build I just finished.
RM500Q-AE Modem
Mini PCIE to M.2 B Key adapter,
16MM N female to MHF4 bulkheads,
20mm - short body 8P8C connector - ethernet gland. (tight fit for the board, full sized 8P8C wouldn't fit)
TEA-005C model number diecast case. (it had all the proper threaded hole sizes)
Super thin ABS sheet to mount the PCB / Make template
Brass stand-off assortment.
60w 48v PoE injector.
2' LMR400 N male to N male x 4
7-29-21 ROOter autobuild for WG3526 (with load balancing / full image)
FWIW AT&T cannot make a call here with a handset. Antennas are 12' guessing.
Temp setup just for a test. This is also 4G using B2 + B14 CA from what I can tell. Idea is to move it to a 65' breakover mast for T-Mobile 5G.
WG3526-P outdoor build.
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
cagordon1985
- Posts: 73
- Joined: Sat May 22, 2021 10:58 pm
- Has thanked: 17 times
- Been thanked: 12 times
WG3526-P outdoor build.
You do not have the required permissions to view the files attached to this post.
-
Dr-BroadBand
- Posts: 558
- Joined: Wed Sep 23, 2020 8:52 am
- Location: Texas
- Has thanked: 94 times
- Been thanked: 118 times
Re: WG3526-P outdoor build.
Awesome job, thanks for sharing!! 
What is your max outdoor Temp and modem Temp??
See link to another WG3526-P outdoor build.
They also have a list of parts used.
https://youtu.be/-SbNkn1161s
https://youtu.be/WMhEMOqNNwQ
What is your max outdoor Temp and modem Temp??
See link to another WG3526-P outdoor build.
They also have a list of parts used.
https://youtu.be/-SbNkn1161s
https://youtu.be/WMhEMOqNNwQ
-
cagordon1985
- Posts: 73
- Joined: Sat May 22, 2021 10:58 pm
- Has thanked: 17 times
- Been thanked: 12 times
Re: WG3526-P outdoor build.
Max outdoor up to 105f rarely. 100f maybe 10-20 days on a bad year. Usually 95f max for 15 days+
Northeast Oklahoma, USA.
So far I've saw the modem hit 62c under hours of load. It was cooler here today. Maybe 85f and overcast.
I do plan on adding a heatsink. Maybe some sort of vent/pump. Not much room for internal fan at this point haha.
Northeast Oklahoma, USA.
So far I've saw the modem hit 62c under hours of load. It was cooler here today. Maybe 85f and overcast.
I do plan on adding a heatsink. Maybe some sort of vent/pump. Not much room for internal fan at this point haha.
-
cagordon1985
- Posts: 73
- Joined: Sat May 22, 2021 10:58 pm
- Has thanked: 17 times
- Been thanked: 12 times
Re: WG3526-P outdoor build.
I like your build a ton. I have that exact enclosure I'm waiting to build. Going to use it for Verizon or Uscellular with similar antennas as you used. Towers are 2.5 miles.Dr-BroadBand wrote: Thu Aug 05, 2021 7:29 am Awesome job, thanks for sharing!!
What is your max outdoor Temp and modem Temp??
See link to another WG3526-P outdoor build.
They also have a list of parts used.
https://youtu.be/-SbNkn1161s
https://youtu.be/WMhEMOqNNwQ
Copycat build incoming!
-
Dr-BroadBand
- Posts: 558
- Joined: Wed Sep 23, 2020 8:52 am
- Location: Texas
- Has thanked: 94 times
- Been thanked: 118 times
Re: WG3526-P outdoor build.
NP that’s what the forum is for.
Taking turns standing on each others shoulders and learning
from others mistakes.
Keep the group updated on your results.
Welcome to the club
-
cagordon1985
- Posts: 73
- Joined: Sat May 22, 2021 10:58 pm
- Has thanked: 17 times
- Been thanked: 12 times
Re: WG3526-P outdoor build.
Today it got up to 95F with direct sun on the modem side of the enclosure, under full load it hit 80C around 6PM. 86C is my shutdown limit. Hardware white paper does warn about temps above 75C for extended use. My own risk.
From experience with these types of devices, they can hover in the mid 80C's and be fine.
Going to add a heatsink Monday, found a 40x26x15mm copper one for $11. I did not see performance degrade at those temps however I'd say my temp is high enough to justify it.
Nuclear option is adding 2 x 25mm x 2 pin fans to the heatsink and power them from the USB.
Edit: No this is the nucelar option
From experience with these types of devices, they can hover in the mid 80C's and be fine.
Going to add a heatsink Monday, found a 40x26x15mm copper one for $11. I did not see performance degrade at those temps however I'd say my temp is high enough to justify it.
Nuclear option is adding 2 x 25mm x 2 pin fans to the heatsink and power them from the USB.
Edit: No this is the nucelar option
You do not have the required permissions to view the files attached to this post.
-
cagordon1985
- Posts: 73
- Joined: Sat May 22, 2021 10:58 pm
- Has thanked: 17 times
- Been thanked: 12 times
Re: WG3526-P outdoor build.
Added a 5mm thick. 25x40mm copper heatsink with 3m thermal transfer tape. Under full load on a very hot day it is now 74c.
