B41 channel when re-assigned to 5G

[joshhighley]

When T-Mo re-assigns a band 41 channel for 5G, does the PLMN change for that channel?

[Didneywhorl]

I believe so. Not 100% sure to what though.

[latic]

I think this has just happened to me. Have always pulled 40-60mbps via my mc7511 and then randomly CA has completely stopped working (have tried doing the whole reset to get it back etc.). Planning on visiting the tower to see what they've done, but one thing I did notice is the PLMN did change.

[Didneywhorl]

Good ole Tmobile, "Helping"

[em7455user]

I think this has just happened to me. Have always pulled 40-60mbps via my mc7511 and then randomly CA has completely stopped working (have tried doing the whole reset to get it back etc.). Planning on visiting the tower to see what they've done, but one thing I did notice is the PLMN did change.

My Calyx Band 41 CA just disappeared as well and I'm wondering if you ever figured out a solution or did your CA return eventually? Maybe it was just temporary tower maintenance?

[cooltech6]

When T-Mo re-assigns a band 41 channel for 5G, does the PLMN change for that channel?

Depends what you are talking about. Changing channel width/adding channels does not change PLMN, unless T-Mo is moving spectrum from one network to another.

[latic]

I think this has just happened to me. Have always pulled 40-60mbps via my mc7511 and then randomly CA has completely stopped working (have tried doing the whole reset to get it back etc.). Planning on visiting the tower to see what they've done, but one thing I did notice is the PLMN did change.

My Calyx Band 41 CA just disappeared as well and I'm wondering if you ever figured out a solution or did your CA return eventually? Maybe it was just temporary tower maintenance?

This was due to the upgrade, but I've just found out that something else strange is happening, after a power cut N41 goes a way and then a few days later comes back. I'm wondering if 100mhz is a bigger power draw and in certain situations they drop it.