Mofi 4500 Sim7 How to Run AT commands

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
jcarver81
Posts: 12
Joined: Thu Oct 29, 2020 10:35 am
Has thanked: 0
Been thanked: 0

Mofi 4500 Sim7 How to Run AT commands

Post by jcarver81 »

Anybody have the newer Sim7 model of the Mofi 4500? I can't figure out how to run AT commands. I'm unsure if my second antenna is actually being used. The signal status page does not show a separate reading for the diversity antenna.
Top
jcarver81
Posts: 12
Joined: Thu Oct 29, 2020 10:35 am
Has thanked: 0
Been thanked: 0

Re: Mofi 4500 Sim7 How to Run AT commands

Post by jcarver81 »

Screen Shot 2020-11-24 at 12.14.29 PM.png
You do not have the required permissions to view the files attached to this post.
Top
User avatar
BillA
Posts: 1230
Joined: Sun Dec 01, 2019 6:46 pm
Location: USA
Has thanked: 219 times
Been thanked: 327 times
Contact:
Contact BillA

Re: Mofi 4500 Sim7 How to Run AT commands

Post by BillA »

jcarver81 wrote: Tue Nov 24, 2020 2:03 pm Anybody have the newer Sim7 model of the Mofi 4500? I can't figure out how to run AT commands. I'm unsure if my second antenna is actually being used. The signal status page does not show a separate reading for the diversity antenna.

Simply flash either of these firmwares:

Here's the latest WiFix firmware for the WE826-T2/GO-U/MoFi-SIM3/4/7/8 dated 2020-05-16.
https://drive.google.com/file/d/1omKTO7 ... d3vAyM5Kk/

OR

Here's the latest GoldenOrb firmware for the WE826-T2/GO-U/MoFi-SIM3/4/7/8 dated 2021-05-13.
https://aturnofthenut.com/upload/we826- ... -05-13.zip
Top
Post Reply

Return to “General and Unclassified”