I'm ordering a LM960 and want to mount on the outside of my house with 4x4 mimo antennas and powered by poe. I have a cat 6 cable installed and will have a poe+ switch and the LM960. What kind of case/enclosure do I install the LM960 into? Will it accept the RJ45 connector for poe or will I need some kind of splitter?
Any recommendations for weather proof box for modem?
Exterior installation of LM960
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Exterior installation of LM960
You will need to install the LM960 into a 4G gateway router, like the WG3526p, and enclose it in a weatherproof box. I made a tutorial a few years ago on here that gets you in the ballpark for what you need.
[url]http://wirelessjoint.com/viewtopic.php?f=23&t=16[/url]
[url]http://wirelessjoint.com/viewtopic.php?f=23&t=16[/url]
-
Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
Re: Exterior installation of LM960
There is a way to mount the modem in a usb to m.2 modem enclosure adapter and out it inside an antenna enclosure then power it over a long usb cord, but I've never done it myself,
