Wireless Joint

You step 15.c step says "Disable Netgear IOT check-ins".
What exactly did you do here?
Is this helping with the problem that some IOT device do not work with the LBR20?

Thanks

The modem was in WBIM mode.

AT+QCFG="usbnet",0

Changed the Modem to USB mode and it worked right away
Back to WBIM:

AT+QCFG="usbnet",2

I have a EM12-G modem from Quectel and a USB3 Modem Adapter (from The Wireless Haven).

When I plug-in the adapter in my USB3 port under Windows, I see the Modem. Ports (3 of them) and the Ethernet Adapter showing in the device manager, but in the "Network Connection" section of the Control Panel ...

The trick from Rooter did work. I had to do this:

echo 1199 9091 > /sys/bus/usb-serial/drivers/option1/new_id

on my WRT and the connect with picocom /dev/ttyUSB0 and set the correct 1,3,1009 and I got my modem back!

Thanks!

Hi Jim,
I received my USB to M.2 adapter today and attempted to follow your EM7565 restore AT commands tutorial.

When I get to the fdt2.exe step I get the following output:
FDT version: 1.0.1806.0
Awaiting suitable port or adapter ...
Enabling selective suspend ...
Firmware download failed ...

I did the same mistake of typing 1,1,1009 instead of the 1,3,1009. Unfortunately my modem does not go in QDLoader mode - it shows the DM and NMEA ports but no QDLoader. in Windows the "Snapdragon" is showing with a band under the "Other drivers" section (No compatible driver found).

Is there a way ...

I accidentally send the wrong AT command to the EM7565
(i sent at!usbcomp=1,1,1009 instead of at!usbcomp=1,3,1009)

After a the modem reboot it was no longer recognized by the router or windows

Is there a way to undo this change?
I do see still two COM Ports for the Sierra modem on the Windows ...