Wireless Joint

2024 Resurrection Update: I decided to tackle this issue again and this time I definitively figured it out. It was all related to signal quality. SINR to be exact. Whenever I get around 15-20 sinr, I can achieve speeds of 100+Mbps I unhooked my mimo external antenna and just hooked up the stock ...

Edit: I figured out how to add this script in rooter. It doesn't seem like my dw5821e likes qmi mode, couldn't keep a steady connection, kept rebooting.

I have Linksys EA8500 router w/ Cat 16 modem I have OnePlus 8 w/ Cat 18 modem Sim swapping back to back nets same results. Router is always 1/2 to 1/4 slower than phone. (Router=110Mbps max, phone=130Mbps-230Mbps) Phone signal is worse avg. -112dB rsrq. Router signal is around -98 to -100dB rsrq ...

[[UPDATE]] >>I was wrong about the speed differences<< The mnvo and tablet plan are pulling in the same speeds. I got my best speedtest so far, 238Mbps. Back to back with mvno sim, then tablet sim tested. So my router is bottle-necking. No updates on the reason yet. To be determined (if possible)

It could also be that the antenna is getting equal frequency reception from multiple towers, causing a form of RF noise called 'cross-talk'. Basically if you have more that one source broadcasting the same general frequency ranges, the receiver can see them all but only use the one it's linked to ...

Hello, over the course of time, i've done the best testing I could while changing the least variables as possible. I have come to 2 general conclusions and 1 main overall conclusion Main conclusion: My tablet plan is half the speed of my phone plan speeds. I have never gotten over 100Mbps with ...

Ok, so I have a modem capable of 4x4 mino. I've had a 2x2 external flat panel antenna and just recently added 2 separate paddle/blade style (they sit by the window) to make it 4 antennas receiving. Now i'm skeptic of how much my external antenna really is helping :-/ I have an OnePlus 8 phone, which ...

BeanEricH wrote: ↑Fri Aug 19, 2022 12:14 pm I'm needing to change IMEI on my Telit 940 and having a hard time finding a walk through with AT Commands. This thread is one of the closest things I've found that may help.

Its in the dw5821 bible/guide, Alberteezy21 posted

I've got a mikrotik setup that's been solid enough for a year plus. Recently I've noticed that there is hotspot data being used and I've narrowed it down to the PS5. Does anyone have a clue why this would be and how I might be able to fix it? It's not a problem at the moment, but I'd like to have ...

There doesn't seem to be much info available about this modem. Not much AT commands, etc. Does anyone know if there is an AT command to lock into 2x2 mimo? Pretty much since/as of mid 2021 this card has been basically "fully vetted". All the information gathered on this modem is scattered across ...

Alberteezy21 wrote: ↑Sat Jul 10, 2021 2:17 pm Here you go. Doesn't have all the AT commands but i believe There's a command in there that will show you all available commands.

https://docs.google.com/document/d/1kPl ... p=drivesdk

List all AT commands
AT$QCCLAC

I can officially say I am running a EA8500+T77W968 (T77W968.F1.0.0.3.5.AT f/w for reference)+T-Mo setup. I've been slowing getting things in the mail. So far, speeds have doubled, but I have not set any custom band lock settings, just running as I got it. From ~40mbps (mc7455 card, bandlocked) to ...

A little bit of info on this, so this card has 5 antenna ports and can work in 4x4 mimo (and 4xCA). Right now I have it connected and through 5ghz wifi I am pulling between 50mbps-60mbps. I have a 2x2 panel antenna and 2 paddle style antennas sitting in the windows, so a total of 4 antennas hooked ...

I downloaded a lot of random or semi-related modem drivers. Didn't really get anywhere. So far the max i've got with it is 40mbps which is the max I get if I band lock the mc7455 I have to band 4. Being able to band lock and tower/band info is what is keeping me from total success with the card. And ...

I put another carrier sim and it worked, then I swapped the tmo back in and was working this time. So i'm not exactly sure what ended up getting it to work.

Ok, have a mc7455 that was out of a BEC technologies LTE router. Generic firmware. I've updated the card to latest f/w. The card works in QMI mode in the BEC router fine (mbim it will not) Put mc7455 in my rooter router and changed to mbim mode: at!gstatus? !GSTATUS: Current Time: 112 Temperature ...

Well just spent a couple hours in an linux environment with this module.
In the end I got no further, it won't accept the command to switch to mbim mode. I can't set the bands and can't get the status to know what band it is currently on. So it seems it is using a locked down custom ZTE firmware.

So I have a Cat16 LTE Modem (MDM9250 like EM7565 uses) out of a zte mf288 router. I have it in a usb adapter. Windows recognizes it but doesn't have any drivers for it. I am using it with a rooterized Linksys EA8500. It is connected and highest I got was 40mbps (which is my max average so far with ...

ZTE....it's basically the companion to the Nighthawk M1 that was sold to Bell/Rogers (Canadian carriers).
It uses the Qualcomm MDM9250 chipset

I was under the impression that Carrier Aggregation would gain me speeds, but so far it has decreased in all scenarios. Ok as a baseline I use a OnePlus 6 phone (cat 16, 4x4 mimo). (and just as a reference with AT&T I can get about 40-60Mbps consistently in 2xCA mode.) So I have a Tmo setup. So ...

I have a EC25-AF for sale or trade for a newer card.
Also have a MC7455.

I have a dead/no power/no LED we826 IMG_20211103_133133.jpg Is this the internal fuse? And when you say conductivity do you mean continuity test to determine if the fuse connection is severed or not? EDIT: misfortune series of events-I had the board out of the case, and the antenna cables shorted on ...

Yeah I was trying to avoid the wait, but I actually don't need this anymore.
Come to find out my router-modem is more capable than I thought.

Anyone looking to sell a we826 (or other) router for cheaper than I can get it overseas?
I don't need the module/modem, so honestly not looking to spend more than $50.

https://wikidevi.wi-cat.ru/D-Link_DWR-961_rev_C1

Is there any info on this router, regarding modified firmware?
Realtek + EM7455 Card seems to be the hardware combo.

Disclaimer: I currently do not own this router.