Wireless Joint

You can download their openwrt firmware they use and open it with a certain program and peek around at the files and see if you see anything if you wanted. Mofi uses really old outdated firmware though.


I searched on this Mofi page:

http://mofinetwork.com/index.php?main_page=page&id=21

but ...

RussWestrem wrote: Mon Sep 17, 2018 6:52 pm You can't do this. Mofi has their firmware and routers programmed to only work on the routers internal id numbers they provide.

Any way to get around this internal ID number?

I find Mofi's user interface and firmware to have more options than OpenWrt / GoldenOrb

Yes I thought of that since the default IP on the Mofi is 192.168.10.1

But no. After flashing the WE826 defaults to 192.168.1.1

I believe the first thing I would try is using the boot loader mode and reflash the firmware from there.


I just successfully flashed from the boot loader. After it finishes the same results. I can ping the device at 192.168.1.1.

But I can't open a web interface. I get the message that the page ...

Could you please help me get the Mofi firmware installed on my OEM WE826?

I flashed the lasted Mofi firmware but after the flash completes, I can't open the web interface. I get the message that the page can't be reached.

I can ping the device at 192.168.1.1.

I also try to SSH to it on port 22 ...

Hello everyone. Is it possible to flash the firmware from the MOFI4500-4GXeLTE V2 to WE826 with MC7455 modem? :?:

The latests Mofi firmware can be found here:

http://mofinetwork.com/index.php?main_page=page&id=21

I have both and have opened them.

The motherboard and modem are exactly the same ...

JimHelms wrote: Fri Sep 07, 2018 6:12 pm GoldenOrb has an AT Command terminal that allows you to define a particular Band, or group of Bands, and lock the modem to only that band(s).

Hello Jim. Thanks for that. Can you please tell me what are all the AT commands to lock the modem to the LTE B4 band?

The Mofi Networks 4500 with the Sierra MC7455 modem has the option to lock to a certain band as you see in the attached picture.

Does the GoldenOrb firmware have that option for the WE826-T

In section II. INSTALLING THE MC7354 INSIDE THE WE826 #2

it says "Install the modem, placing the while (white) spacers between the modem and PCB, secure with the screws."

Where can I get some of these spacers and screws?