Wireless Joint

upload is almost 4 times faster than the download? Internet speed test 015102050100+ 41.6 Megabits per second Testing upload... 11.9 Mbps download 41.6 Mbps upload Latency: 32 ms Server: Atlanta, GA Your Internet speed is typical Your Internet connection should be able to handle streaming an HD ...

At!GSTATUS? !GSTATUS: Current Time: 123363 Temperature: 35 Reset Counter: 1 Mode: ONLINE System mode: LTE PS state: Attached LTE band: B66 LTE bw: 20 MHz LTE Rx chan: 0 LTE Tx chan: 132072 LTE SSC1 state:ACTIVE LTE SSC1 band: B1 LTE SSC1 bw : 5 MHz LTE SSC1 chan: 1150 LTE SSC2 state:ACTIVE LTE SSC2 ...

Hmmm...my speeds are up and down...not sure if its a bad connection of what.... AT-Command Execution OK AT*CNTI=0 *CNTI: 0,LTE OK AT!SELRAT? !SELRAT: 00, Automatic OK AT+ECIO? +ECIO: NOT IMPLEMENTED OK AT+RSCP? +RSCP: OK AT!UMTSCHAN? !UMTSCHAN: NOT IMPLEMENTED OK AT!GSTATUS? !GSTATUS: Current Time ...

Thanks again....this is a great help!

Thank You!

I'm trying to attach a Linksys WRT3200acm as the preferred whole house router (2.4ghz 5ghz) . I'm assuming this should be plug and play. However, read somewhere that I needed to change the default IP on the WE826 router? Advice?

Is there one available?

I guess what I'm looking for is a single SSID internet connection throughout the house (5,000 sq ft)

I was thinking of connecting an ORBI router to the WE826-T2. Then from the ORBI router, connecting the Orbi satellites via Ethernet. It could cover my 5,000 sq.ft. house with One router and Two Satellites. things that need a connection: 5 TV's Xbox Wii Apple Devices Thermostat Ring Door Bells Camera ...

The interference would probably be my AT&T Z700A home phone or some of the kids tools. Probably not the neighbors. I'm in the middle of 80 acres and the closest neighbor is 1/2 mile. Using the Ethernet was my plan from the beginning. I've order two 15dbi flat panel antenna's and plan to install away ...

ok...I think I have the answer. Took the unit outside. I recently built a barn house with all metal. I tested outside about 30 feet from the house. Hit almost 60 mbps with the stock antenna's. at!gstatus? !GSTATUS: Current Time: 1003 Temperature: 46 Reset Counter: 1 Mode: ONLINE System mode: LTE PS ...

Can you tell from the stats if Carrier Aggregation is working? Shouldn't the EM7565 have up to 3 bands?

ethernet is faster (20-30 mbps)...wifi is really slow...

Here's the results with ethernet connection...better

32.7
Mbps download
4.62
Mbps upload
Latency: 31 ms
Server: Atlanta, GA
Your Internet speed is fast
Your Internet connection should be able to handle multiple devices streaming HD videos at the same time.

I'm using the stock antenna's that came with the WE826. I will plug in an ethernet cable and see what happens.

Speed Test...
2.29
Mbps download
1.27
Mbps upload
Latency: 64 ms
Server: Atlanta, GA
Your Internet speed is very slow
Your Internet download speed is very slow. Web browsing should work, but videos could load slowly.

Verizon Debug Information.... At!GSTATUS? !GSTATUS: Current Time: 263 Temperature: 47 Reset Counter: 1 Mode: ONLINE System mode: LTE PS state: Attached LTE band: B4 LTE bw: 20 MHz LTE Rx chan: 2050 LTE Tx chan: 20050 LTE SSC1 state:ACTIVE LTE SSC1 band: B12 LTE SSC1 bw : 10 MHz LTE SSC1 chan: 5230 ...

Speed Test
0.24
Mbps download
0.41
Mbps upload
Latency: 61 ms
Server: Atlanta, GA
Your Internet speed is very slow
Your Internet download speed is very slow. Web browsing should work, but videos could load slowly.

Not sure where to start, but here goes.... AT&T Debug information... At!GSTATUS? !GSTATUS: Current Time: 800 Temperature: 45 Reset Counter: 1 Mode: ONLINE System mode: LTE PS state: Attached LTE band: B2 LTE bw: 15 MHz LTE Rx chan: 1025 LTE Tx chan: 19025 LTE SSC1 state:NOT ASSIGNED LTE SSC2 state ...

I know you guys are closed...so, favor please.

Are these the right jumpers for the EM7565?

https://www.amazon.com/Female-Pigtail-J ... HV6LY?th=1

ok..finally got the COM port restored. Still having issues connecting. +CEREG: 2,1,"A81F","AA","291D016",7 OK AT+CGEQNEG=1 ERROR Tue Oct 29 06:35:42 2019 : /dev/ttyUSB2 AT+CSQ;+CESQ +CSQ: 19,99 +CESQ: 99,99,255,255,22,33 OK AT*CNTI=0 *CNTI: 0,LTE OK AT!SELRAT? ERROR AT+ECIO? +ECIO: NOT IMPLEMENTED ...

to restore the modem COM port, a USB to M.2 (NGFF) adapter or enclosure is required to connect the EM7564 to a USB port on the Windows PC. got one ordered.

Hoping this finally gets me up and running.

looks like you are out of USB to M.2 adapter for the EM7565. Can you recommend another location? Amazon?

what's the fix?

https://thewirelesshaven.com/shop/pcie-m-2/m-2-ng ... card-slot/

Will it help to flash the EM7565?

I did use the AT Command to place in MBIM but it was for the EM7565. the AT Command post is not working.

tried the RESTORE...Same results...will try reseating the EM7565 tonight.....Hoping this resolves...

Hmmm...not sure what this means...get these messages when I try entering commands Thu Jun 27 09:32:15 2019 : /dev/ttyUSB Can't open device /dev/ttyUSB. Thu Jun 27 09:32:22 2019 : /dev/ttyUSB Can't open device /dev/ttyUSB. Thu Jun 27 09:32:51 2019 : /dev/ttyUSB Can't open device /dev/ttyUSB. Thu Jun ...

This is under the message: Device Information T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1 B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 4.14 S: Manufacturer=Linux 4.14.131 ehci_hcd S: Product ...

I go to 'Modem" and "Debug Information" and all I see is this message:

No entries in log file

what was the fix for this? I'm experiencing the same issue

Not sure what I did....I somehow removed my modem....any help would be appreciated Thu Jun 27 12:23:45 2019 : Attempting to Connect Modem #1 (Sierra_Wireless,_Incorporated Sierra_Wireless_EM7565_Qualcomm®_Snapdragon™_X16_LTE-A) Thu Jun 27 12:24:29 2019 : Retry Connection with Modem #1 Thu Jun 27 12:2 ...

Here's the results....

AT+CPIN?
+CME ERROR: SIM not inserted

AT+CNUM
ERROR

1. checked the connections to the modem multiple times.
2. removed tit/tips on sim card adapter, as well as cleaned sim card
3 loaded firmware and reset back to OEM (both have same error)

it's late....try again tomorrow....

I'm not a betting man, but I've got my money on a faulty sim reader.

additional info...not sure if this is helpful or not... Device Information T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1 B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 4.14 S: Manufacturer=Linux 4 ...

I got the sim to finally stay. followed the steps...got the following error....not sure how to progress....help please! Mon Oct 14 19:36:03 2019 : /dev/ttyUSB2 AT!SELRAT? !SELRAT: 00, Automatic OK Mon Oct 14 19:36:04 2019 : /dev/ttyUSB2 AT+CFUN=1 OK ATI Manufacturer: Sierra Wireless, Incorporated ...

New build...got the point where I was insert the sim card....

weird...i try to put the sim card in the slot, but the card goes in and immediately kicks out. I was expecting it to click in place.

Any suggestions.

ok...here's what I have so far. WE826-T2 4G LTE WiFi Router 12V 2.5A 30W Power Adapter (2.1mm Tip) Sierra Wireless EM7565 CAT-12 LTE-A Pro Modem USB3.0 to NGFF M.2 Key B Adapter Enclosure with SIM Card Slot MHF4 Pigtail Jumper Cables I will probably mount a external antenna's...Still trying to ...

Need help with a “Whole Home” Solution. Ideas welcomed!! Currently using the “Home Phone and Wireless Internet” solution from AT&T. The modem is the ZTE Z700A router (with internal antenna’s). I have the AT&T Unlimited Plus Multi Line plan. I used about 168 GB last month (between 4 Phones and Router) ...

Search found 39 matches