Manual for the WE826-T2?
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
- MitchDudley
- Posts: 39
- Joined: Thu Oct 03, 2019 9:30 am
- Has thanked: 0
- Been thanked: 0
- JimHelms
- Site Admin
- Posts: 1362
- Joined: Tue Dec 19, 2017 8:59 pm
- Location: DFW Texas
- Has thanked: 79 times
- Been thanked: 194 times
- Contact:
Re: Manual for the WE826-T2?
Selecting a manual will be dependent on what firmware you are using.
Here is the OEM User Manual for the WE826:
If your running GoldenOrb, there is a lot of information HERE.
Since GoldenOrb is based on OpenWRT, you will find some good information HERE.
Here is the OEM User Manual for the WE826:
If your running GoldenOrb, there is a lot of information HERE.
Since GoldenOrb is based on OpenWRT, you will find some good information HERE.
You do not have the required permissions to view the files attached to this post.
- MitchDudley
- Posts: 39
- Joined: Thu Oct 03, 2019 9:30 am
- Has thanked: 0
- Been thanked: 0
Re: Manual for the WE826-T2?
Thank You!
I'm trying to attach a Linksys WRT3200acm as the preferred whole house router (2.4ghz 5ghz) . I'm assuming this should be plug and play. However, read somewhere that I needed to change the default IP on the WE826 router? Advice?
I'm trying to attach a Linksys WRT3200acm as the preferred whole house router (2.4ghz 5ghz) . I'm assuming this should be plug and play. However, read somewhere that I needed to change the default IP on the WE826 router? Advice?
- MitchDudley
- Posts: 39
- Joined: Thu Oct 03, 2019 9:30 am
- Has thanked: 0
- Been thanked: 0