Wireless Joint

Posted: **Mon Jun 17, 2024 12:28 am**

Okay, i have my modem into a m.2 adapter to 5g lan adapter. Just updated my modem to newer firmware. Then my green power led went out. Then the very next day, my green 5g led light started flickering, then it has went out also. Is there a way to turn the lights back on using at-commands? Or maybe test the power off both led lights using the at-commands? I have a donor router using the same micro led, so I can swap those in anytime.

Posted: **Mon Jun 17, 2024 4:29 am**

It's unlikely that the modem's firmware update caused the lights to go out, it may be just a coincidence.
On the other hand, the router's firmware update can cause some light not to function which can usually be fixed, but not by AT commands.
Try replacing the LED's first.

Wireless Joint

Mcuzone led lights not working properly after rm500 update

Mcuzone led lights not working properly after rm500 update

Re: Mcuzone led lights not working properly after rm500 update