Page 1 of 1

Updating GO Firmware

Posted: Fri Apr 28, 2023 7:29 am
by dbshelton
I have been trying to update the Golden Orb (Rooter) firmware on my routers. No problem with my TP-Link A7 and GLInet 1300. When updating my Linksys WRT3200ACM and Miktotik GR750 I was unsuccessful. Neither one of those will work anymore. I can't even access them at all. What did I do wrong? I am not sure what to do next

Re: Updating GO Firmware

Posted: Sun Apr 30, 2023 10:44 am
by Didneywhorl
Recovery mode should be available on all devices with Rooter previously installed. SHOULD.

Power down, hold in reset button, power on, wait 12 seconds, release reset button, log in to 192.168.1.1.

Might need to manually assign pc interface to 192.168.1.x subnet.

Last resort is UART/TTL serial interface.