Page 1 of 1
Mikrotik RMB11G Goldenorb 19.07.06 "can't open dev/ttyUSB1"
Posted: Fri Nov 05, 2021 5:31 pm
by supersailor89
i flashed golden orb to the RBM11G, inserted the modem Quectel ec25af, i get the modem present not connected, and on the Network status it says " can't open device dev/ttyUSB1".
Under # sys/class/tty i only see TTYs1-3 and ttyUSB0. no other ttyusb how do i change it to look at usb0 and not 1?
Re: Mikrotik RMB11G Goldenorb 19.07.06 "can't open dev/ttyUSB1"
Posted: Fri Nov 05, 2021 7:18 pm
by punkguy00017
Need to change it to mbim
Re: Mikrotik RMB11G Goldenorb 19.07.06 "can't open dev/ttyUSB1"
Posted: Sat Nov 06, 2021 10:57 am
by Didneywhorl
supersailor89 wrote: Fri Nov 05, 2021 5:31 pm
i flashed golden orb to the RBM11G, inserted the modem Quectel ec25af, i get the modem present not connected, and on the Network status it says " can't open device dev/ttyUSB1".
Under # sys/class/tty i only see TTYs1-3 and ttyUSB0. no other ttyUSB how do I change it to look at usb0 and not 1?
Set it to USBtty0 maybe, but honestly there should be more than one there.
Screenshot 2021-11-06 105651.png
Use the VID and PID of your modem. You can find them on the debug screen if you dont know them.
I'd set both the pp and comm port to the same port, especially since its all you have there.
Re: Mikrotik RMB11G Goldenorb 19.07.06 "can't open dev/ttyUSB1"
Posted: Fri Jul 01, 2022 6:33 pm
by dieselfumes
Can't open device /dev/ttyUS Can't open device /dev/ttyUS
Comm Port : /dev/ttyUSB1
I can't get the modem to connect. EC25-AF
I hoping someone has this figured out.