Page 1 of 1

WE826-T2 W/ EM7455

Posted: Sun Dec 13, 2020 12:54 pm
by wisenet
So I was fighting with a EP06-A and could not get it to work. So I broke down and purchased the EM7455. Swapped out the modem in the T2, I had WIFIX Goldenorb installed so I set the APN popped in a SIM and we are off to the races. Well on my phone it is working well. My PC on the other hand will not work. I can connect both to it and the PC will not work but the Phone will. Any Ideas?

Re: WE826-T2 W/ EM7455

Posted: Thu Dec 24, 2020 12:44 am
by Didneywhorl
So your saying its working over wifi but not LAN?

Re: WE826-T2 W/ EM7455

Posted: Thu Dec 24, 2020 7:06 am
by toddw
I have three units with March release of goldenorb where the DHCP service does not play well with windows devices. I have not pinpointed what causes it, but disabling IPV6 seems to fix it. Or making the edits restarts the DHCP daemon. Either way this fixed it and I haven't had an issue with PC's since...

Click on “Network”
Click on “Interfaces”
Click on “Edit” next to “LAN br-lan”
At the bottom of the screen, under “DHCP Server”
Click on “Advanced Settings”
Click on “Force”
Click on “Save and Apply”
Click on “IPv6 Settings”
Next to Router Advertisement – Service, click the drop down for: Disabled
Next to DHCPv6-Service, click the drop down for: Disabled
Next to NDP-Proxy, click the drop down for: Disabled
Click on “Save & Apply”