Can't connect to raspberry pi
Posted: Thu May 21, 2020 11:06 pm
Hello,
So I'm trying to go the route of using a raspberry pi, but I can't seem to connect to the device. I hooked up an Ethernet cable, but the wireless network watcher application I'm using isn't showing the ip address for the pi. I also tried to connect using putty, but no success.
https://www.youtube.com/watch?v=lYvtQ0EP9Fg
I'm following this video on installing openwrt on a pi(figured it would be similar to installing rooter).
This is what I've done so far:
-installed the rooter firmware for raspberry pi 3b+ from here: https://www.ofmodemsandmen.com/firmware16.html
-formatted sd card
-flashed firmware onto sd card
-plug in sd card, network card/usb adapter, and ethernet cable, and then turned the pi on
What am I missing? Any help would be appreciated into what I'm doing wrong.
Here is a list of items I'm using:
rasberry pi 3b+
em7565
this usb enclosure: https://www.ebay.com/itm/NGFF-M-2-to-US ... 2749.l2649
So I'm trying to go the route of using a raspberry pi, but I can't seem to connect to the device. I hooked up an Ethernet cable, but the wireless network watcher application I'm using isn't showing the ip address for the pi. I also tried to connect using putty, but no success.
https://www.youtube.com/watch?v=lYvtQ0EP9Fg
I'm following this video on installing openwrt on a pi(figured it would be similar to installing rooter).
This is what I've done so far:
-installed the rooter firmware for raspberry pi 3b+ from here: https://www.ofmodemsandmen.com/firmware16.html
-formatted sd card
-flashed firmware onto sd card
-plug in sd card, network card/usb adapter, and ethernet cable, and then turned the pi on
What am I missing? Any help would be appreciated into what I'm doing wrong.
Here is a list of items I'm using:
rasberry pi 3b+
em7565
this usb enclosure: https://www.ebay.com/itm/NGFF-M-2-to-US ... 2749.l2649