Hello,
So I'm trying to go the route of using a raspberry pi, but I can't seem to connect to the device. I hooked up an Ethernet cable, but the wireless network watcher application I'm using isn't showing the ip address for the pi. I also tried to connect using putty, but no success.
https://www.youtube.com/watch?v=lYvtQ0EP9Fg
I'm following this video on installing openwrt on a pi(figured it would be similar to installing rooter).
This is what I've done so far:
-installed the rooter firmware for raspberry pi 3b+ from here: https://www.ofmodemsandmen.com/firmware16.html
-formatted sd card
-flashed firmware onto sd card
-plug in sd card, network card/usb adapter, and ethernet cable, and then turned the pi on
What am I missing? Any help would be appreciated into what I'm doing wrong.
Here is a list of items I'm using:
rasberry pi 3b+
em7565
this usb enclosure: https://www.ebay.com/itm/NGFF-M-2-to-US ... 2749.l2649
Can't connect to raspberry pi
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
