I put a post here related to this issue. Thanks.
http://wirelessjoint.com/viewtopic.php?f=16&t=364&p=9548#p9548
Band Lock MR1100
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Re: Band Lock MR1100
You can ssh into it and do a band select then go back into the interface and just select the band you want. Example: https://www.youtube.com/watch?v=GtqLH6yzqdM
Re: Band Lock MR1100
I can set it with commands to select the band I want no problem. I've tried the spread sheet to combine bands and it causes the M1 crash. I have to reset to get it back.koop78 wrote: ↑Tue Jun 30, 2020 8:47 pm You can ssh into it and do a band select then go back into the interface and just select the band you want. Example: https://www.youtube.com/watch?v=GtqLH6yzqdM
Re: Band Lock MR1100
I have it now. The spread sheet calculator wasn't giving the right combo number. I became self explanatory as I looked at it closely. These are the commands to get bands 2 and 12 plus combine them as an option.
AT!BAND=02,"B2", 0, 2
AT!BAND=03,"B12", 0, 800
AT!BAND=04,"ATT 2,12",0, 802
Run this command to see what bands are on the M1.
AT!BAND=?
Here is a calculator to add the values from the results of the command.
https://www.calculator.net
AT!BAND=02,"B2", 0, 2
AT!BAND=03,"B12", 0, 800
AT!BAND=04,"ATT 2,12",0, 802
Run this command to see what bands are on the M1.
AT!BAND=?
Here is a calculator to add the values from the results of the command.
https://www.calculator.net
