to be able to see what band I am using
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
to be able to see what band I am using
I am using Firmware Version OpenWrt SNAPSHOT r9614-b61495409b / LuCI Master (git-19.065.57576-61ea3ed) the model name is WE826-T2 I do not see what band I am using is there a way to see that I like the Firmware it stable and it runs faster the golden orb I have an MC7455
-
swwifty
- Posts: 565
- Joined: Thu Aug 30, 2018 8:21 pm
- Location: NE GA Mountains
- Has thanked: 1 time
- Been thanked: 68 times
Re: to be able to see what band I am using
I imagine you'll have to use some software to send AT commands to the modem if you are just using plain old openwrt.
Maybe try the tool 'screen' ?
Maybe try the tool 'screen' ?
-
swwifty
- Posts: 565
- Joined: Thu Aug 30, 2018 8:21 pm
- Location: NE GA Mountains
- Has thanked: 1 time
- Been thanked: 68 times
Re: to be able to see what band I am using
This is the tool I'm talking about: https://www.gnu.org/software/screen/manual/screen.html
You should be able to install it, then just run "screen /dev/YOURMODEMDEVICEHERE"
You should be able to install it, then just run "screen /dev/YOURMODEMDEVICEHERE"
