I recently and finally fixed my boot loop issue with my MR6500.
Now onto the next issue, how do I downgrade fw in order to have telnet access and openlock and openmep activated?
Thanks.
Edit: I am currently on NTGX65_10.01.47.00
Whenever I try to telnet 5510 or 23, I get an error with putty.
Rollback firmware MR6500
-
- Posts: 11
- Joined: Sat Feb 08, 2020 2:08 pm
- Has thanked: 0
- Been thanked: 0
Re: Rollback firmware MR6500
My limited knowledge seems to indicate you could flash it to a MR6400 (and lose some bands that you may or may not need depending on your use case) or wait until the MR6550 firmware is widely available.
- Rich Hathaway
- Posts: 622
- Joined: Mon Mar 08, 2021 2:41 pm
- Has thanked: 12 times
- Been thanked: 214 times