Ws1208v2 and EM 20. AT+QTEMP error

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
farberm
Posts: 38
Joined: Wed Mar 14, 2018 6:32 am
Has thanked: 0
Been thanked: 1 time

Ws1208v2 and EM 20. AT+QTEMP error

Post by farberm »

I m running a em20 in a ws1208v2. I get an error on AT+QTEMP command? Also get an error with AT +QGPSLOC

Any suggestions on how to resolve.

The module reports the temp correctly in a zbt wg1i608 no problems.
Top
dieselfumes
Posts: 2
Joined: Thu Feb 03, 2022 7:02 pm
Has thanked: 2 times
Been thanked: 0

Re: Ws1208v2 and EM 20. AT+QTEMP error

Post by dieselfumes »

farberm wrote: Wed Dec 21, 2022 10:46 pm I m running a em20 in a ws1208v2. I get an error on AT+QTEMP command? Also get an error with AT +QGPSLOC

Any suggestions on how to resolve.

The module reports the temp correctly in a zbt wg1i608 no problems.
I would try reinstalling or upgrade router firmware.
Top
Post Reply

Return to “General and Unclassified”