Program Quecetel Modem after firmware and Factory reset?
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
vahnwinkle
- Posts: 52
- Joined: Tue Mar 08, 2022 3:24 pm
- Has thanked: 2 times
- Been thanked: 12 times
Program Quecetel Modem after firmware and Factory reset?
Does any know the set of AT commands that can re-program the Quectel modems. I have an RM500QAE and an EM16G. I have been trying to fix my internet and performed firmware upgrades and full factory resets on both modems but I am having issues with my speeds now. I would like to re-program for tmobile LTE. Pease help as I use these for my work. Thank you
-
vahnwinkle
- Posts: 52
- Joined: Tue Mar 08, 2022 3:24 pm
- Has thanked: 2 times
- Been thanked: 12 times
Re: Program Quecetel Modem after firmware and Factory reset?
I am getting 10 mb download speed and a crazy 55 mb upload after I factory reset and updated firmware on Quectel RM500QAE 5g modem. Before the reset I was getting over 100mb down and about 20 upload. Any ideas on a settings in the AT commands that would help with this issue of speed? Something has changed in the modem that is causing my throttled speeds.
Queried Command:
AT&V
&C: 1
&D: 2
&F: 0
&W: 0
E: 1
Q: 0
V: 1
X: 4
Z: 0
S0: 0
S3: 13
S4: 10
S5: 8
S6: 2
S7: 0
S8: 2
S10: 15
OK
Queried Command:
AT&V
&C: 1
&D: 2
&F: 0
&W: 0
E: 1
Q: 0
V: 1
X: 4
Z: 0
S0: 0
S3: 13
S4: 10
S5: 8
S6: 2
S7: 0
S8: 2
S10: 15
OK
You do not have the required permissions to view the files attached to this post.
-
vahnwinkle
- Posts: 52
- Joined: Tue Mar 08, 2022 3:24 pm
- Has thanked: 2 times
- Been thanked: 12 times
Re: Program Quecetel Modem after firmware and Factory reset?
Here are my other query's
AT+QCFG=?
+QCFG: "rrc",(0-5)
+QCFG: "hsdpacat",(6,8,10-24)
+QCFG: "hsupacat",(5,6)
+QCFG: "pdp/duplicatechk",(0,1)
+QCFG: "risignaltype",("respective","physical")
+QCFG: "lte/bandprior",(1-43),(1-43),(1-43)
+QCFG: "volte_disable",(0,1)
+QCFG: "data_interface",(0,1),(0,1)
+QCFG: "pcie/mode",(0,1)
+QCFG: "pcie_mbim",(0,1)
+QCFG: "sms_control",(0,1),(0,1)
+QCFG: "call_control",(0,1),(0,1)
+QCFG: "usb/maxpower",(0-900)
+QCFG: "efratctl",(0,1)
+QCFG: "gatewayset",(0,1)[,<gateway>]
+QCFG: "netmaskset",(0,1)[,<netmask>]
+QCFG: "mmwave",ant_chip,ant_type
+QCFG: "usage/apmem"
+QCFG: "enable_gea1"[,(0,1)]
OK
AT+QNWINFO
+QNWINFO: "FDD LTE","311490","LTE BAND 2",900
OK
AT+COPS?
+COPS: 0,2,"311490",7
OK
AT+CSQ
+CSQ: 27,99
OK
AT+CREG?
+CREG: 0,3
OK
AT+CGREG?
+CGREG: 0,0
OK
AT+CPAS=?
+CPAS: (0,3,4)
OK
AT+QCFG=?
+QCFG: "rrc",(0-5)
+QCFG: "hsdpacat",(6,8,10-24)
+QCFG: "hsupacat",(5,6)
+QCFG: "pdp/duplicatechk",(0,1)
+QCFG: "risignaltype",("respective","physical")
+QCFG: "lte/bandprior",(1-43),(1-43),(1-43)
+QCFG: "volte_disable",(0,1)
+QCFG: "data_interface",(0,1),(0,1)
+QCFG: "pcie/mode",(0,1)
+QCFG: "pcie_mbim",(0,1)
+QCFG: "sms_control",(0,1),(0,1)
+QCFG: "call_control",(0,1),(0,1)
+QCFG: "usb/maxpower",(0-900)
+QCFG: "efratctl",(0,1)
+QCFG: "gatewayset",(0,1)[,<gateway>]
+QCFG: "netmaskset",(0,1)[,<netmask>]
+QCFG: "mmwave",ant_chip,ant_type
+QCFG: "usage/apmem"
+QCFG: "enable_gea1"[,(0,1)]
OK
AT+QNWINFO
+QNWINFO: "FDD LTE","311490","LTE BAND 2",900
OK
AT+COPS?
+COPS: 0,2,"311490",7
OK
AT+CSQ
+CSQ: 27,99
OK
AT+CREG?
+CREG: 0,3
OK
AT+CGREG?
+CGREG: 0,0
OK
AT+CPAS=?
+CPAS: (0,3,4)
OK
