I was using connectall sim in a wg1608 for a couple years but they recently had to send me a new SIM card due to their service being updated. The old sim was working fine up until a week ago. I finally opened the new sim and used it in their supplied t10 franklin which works (slow).
I tried putting the new sim into the wg1608 but it does not work.
Any ideas? I am sure I am missing something.
connectall new sim, no longer works in wg1608
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
radec
- Posts: 68
- Joined: Wed Jan 22, 2020 4:17 pm
- Location: pnw
- Has thanked: 23 times
- Been thanked: 21 times
Re: connectall new sim, no longer works in wg1608
What APN did you set? The old sprint APN wont work any more. Needs to be B2B.t-mobile.com or fast.t-mobile.com.
In my experience so so far with the new t-mobile sims is that you need to match modem identities.
In my experience so so far with the new t-mobile sims is that you need to match modem identities.
Re: connectall new sim, no longer works in wg1608
I tried B2B.t-mobile.com and fast.t-mobile.com, save & apply, reboot, but sadly it still left me with the modem screen reporting "Failed to Connect : Retrying"
I also ensured I set the band locking to use all bands.
I was initially using the isdn.sprint.com (possibly mispelled it) and was sure this was likely the issue as you mentioned.
I will try to keep searching in the mean time and will update if I figure it out. This t10 franklin is a bit trash compared to the wg1608+antenna set up I got thanks to the fellas at wirelessjoint/ltefix.
I also ensured I set the band locking to use all bands.
I was initially using the isdn.sprint.com (possibly mispelled it) and was sure this was likely the issue as you mentioned.
I will try to keep searching in the mean time and will update if I figure it out. This t10 franklin is a bit trash compared to the wg1608+antenna set up I got thanks to the fellas at wirelessjoint/ltefix.
-
radec
- Posts: 68
- Joined: Wed Jan 22, 2020 4:17 pm
- Location: pnw
- Has thanked: 23 times
- Been thanked: 21 times
Re: connectall new sim, no longer works in wg1608
Did you match the modem identity? Seems to be necessary now.user232 wrote: Tue May 03, 2022 11:37 am I tried B2B.t-mobile.com and fast.t-mobile.com, save & apply, reboot, but sadly it still left me with the modem screen reporting "Failed to Connect : Retrying"
I also ensured I set the band locking to use all bands.
I was initially using the isdn.sprint.com (possibly mispelled it) and was sure this was likely the issue as you mentioned.
I will try to keep searching in the mean time and will update if I figure it out. This t10 franklin is a bit trash compared to the wg1608+antenna set up I got thanks to the fellas at wirelessjoint/ltefix.
Re: connectall new sim, no longer works in wg1608
No, I am unaware of what that is -- I assumed it was a term for changing the APN. Will look it up now, using the em12-g. Will report back. Thanks for the information again Radec!
-
radec
- Posts: 68
- Joined: Wed Jan 22, 2020 4:17 pm
- Location: pnw
- Has thanked: 23 times
- Been thanked: 21 times
Re: connectall new sim, no longer works in wg1608
No problem, glad to help if I can.user232 wrote: Tue May 03, 2022 1:36 pm No, I am unaware of what that is -- I assumed it was a term for changing the APN. Will look it up now, using the em12-g. Will report back. Thanks for the information again Radec!
Sent you a PM
