I’ve been running a WG3526 router with a Quectal EP-06, YAGI antenna and an ATT $20 post paid tablet plan for a little over a year without many issues thanks to help from this site. I’ve run into an issue this week where I have a relatively strong signal and am connected to a tower (usually on B66) but can no longer access websites.
To clarify, I can open a browser, get results to come back from Google searches but can’t connect to any sites via the links displayed. I also can’t get email or anything else requiring internet connectivity.
I’ve reflashed the router firmware 3 times in a row using the same GoldenOrb build that was previously loaded and working before this (2021-08-15 release). After I set APN (broadband) I can see the modem connecting and AT commands successfully completing in the Debug window.
I’ve tested the SIM card in an iPad and it works fine.
I saw some references to possibleIPV4 and IPV6 settings in other posts but this isn’t something I have knowledge of. Any thoughts?
WG3526 with EP-06 connected but unable to access websites
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
- Posts: 3
- Joined: Sun Nov 01, 2020 9:27 pm
- Has thanked: 4 times
- Been thanked: 0
Re: WG3526 with EP-06 connected but unable to access websites
Try setting your dns that might help with loading websites.
https://wirelessjoint.com/viewtopic.php ... =10#p10732
https://wirelessjoint.com/viewtopic.php ... =10#p10732
-
- Posts: 3
- Joined: Sun Nov 01, 2020 9:27 pm
- Has thanked: 4 times
- Been thanked: 0
Re: WG3526 with EP-06 connected but unable to access websites
Thanks for the quick reply. I set custom DNS servers as outlined in that post but no change in behavior after saving and re-starting.