Enable passthrough on WG3526-P?

[Shades]

I have a WG3526-P using OpenWRT which I am not familiar with. I can get internet on the WG3526 side but anything past the POE converter I get nothing.
Found one post that said to disable IPV4 & IPV6 and enable DMZ but cannot find those options? Enabled Access Point mode on my TP-Link router with no success either.

What may I be doing wrong here?

[Didneywhorl]

If you are trying to use your WG3526-P router as basically a modem, you will want to basically make it a DMZ mode router.

Look this this post: https://wirelessjoint.com/viewtopic.php?f=21&t=49

[Shades]

Awesome thank you I will try this!