AT+ZNLOCKBAND

ROUTER Topics that are general or unclassified in nature, or does not belong elsewhere
Forum rules
Please assure there is not an existing forum and topic related to your post
Post Reply
Minato_12598
Posts: 8
Joined: Tue Nov 03, 2020 3:33 am
Has thanked: 1 time
Been thanked: 0

AT+ZNLOCKBAND

Post by Minato_12598 »

Hi, as Ive explore my modem, ive come to know its AT commands but does NOT understand some of it.
But i think one of the commands that could solve my CARRIER AGGREGATION problem is the command below but i dont know what to fill in,such as those LTE BAND ENABLE,GW BAND ENABLE, LTE BAND MASK, GW BAND MASK,
Hope you can help guys. Maybe we have different modem but maybe those words sounds familliar to you.
AT+ZNLOCKBAND=<lte_band_enable>, <gw_band_enable>, <lte_band_mask>, <gw_band_mask>
User avatar
Didneywhorl
Posts: 3646
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 1370 times
Been thanked: 764 times
Contact:

Re: AT+ZNLOCKBAND

Post by Didneywhorl »

The LTE_BAND_MASK is the hard part, the rest is likely...

AT+ZNBANDLOCK=1,0,<lte_band_mask>

you can likely leave the last part blank or just add a ",0" at the end.

You can try the band mask for Quectel, Sierra, or Telit. The AT command manuals have them. We also have few spreadsheets on them. Look under the modem forums
Minato_12598
Posts: 8
Joined: Tue Nov 03, 2020 3:33 am
Has thanked: 1 time
Been thanked: 0

Re: AT+ZNLOCKBAND

Post by Minato_12598 »

Thank you bro. It really helps. The quectel band mask works.
Post Reply

Return to “General and Unclassified”