Wireless Joint

I have looked & found how to change what band the modem searches through, locking bands, & selecting multiple bands for Carrier Aggregation. However, I have not found any information on the results of the modems scanning the bands. I assume there is a command to show what the modem actually finds in ...

Finally got it working on Verizon! Rooter + Generic Firmware as recommended above!

When I ran
at!usbcomp=?
Received: usbcomp=1,1,10F

so these were the commands that i entered & it finally connected!

at!entercnd="A710"
at!usbcomp=1,1,1009
at!selrat=06
at!reset

I also relocated the router to ...

Problem is NOT solved. I am back to the issue of no Signal or Cell Information. It sees my sim card but I can't get
any SIGNAL readings. I have since reflashed the modem & router in an attempt to get the information back but no luck. I also have the USB to Mini PCIE adapter and checking for signal ...

Thank you!!!! Finally some success!!! It actually connected, just for a moment then lost it. here are the results. What next?

AT!GSTATUS?
!GSTATUS:
Current Time: 1048 Temperature: 33
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS state: Not attached
LTE band: B13 LTE bw: 10 MHz
LTE Rx chan ...

I have installed a MC7455 in a Mofi4500 Sim3 (WE826T) router to use on Verizon. I have not had any luck connecting to the internet. I have tried Mofi, WiFiX, & ROOter Firmware. I have done a Factory Resets on each Firmware. I have ran

at!entercnd="A710"
at!RMARESET=1
at!reset

at!entercnd="A710 ...