Wireless Joint

for using an external battery I think that this is the best vase
https://www.amazon.com/RLSOCO-Carrying-NETGEAR-Nighthawk-Hotspot/dp/B0CC499SBQ/ref=sr_1_1_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3AZFBNQB74HDV&dib=eyJ2IjoiMSJ9.aXVE1ElV3poveF7MZNg-EQ._jZNeSGYh3aPGn8czORRixchP44TCdTCVEXGG ...

It was a bad battery now its not overheating

Should I do a downgrade to
a 10.x?

Or schould I use it without a battery. In LTE Mode its not going to overhead but in LTE/5G its doing this.

Hi!

Ho can I handle the overheating problem with my 6450? Do I need only downgradeing it or is there more to do?

thanks

Klaus

Gosh, I haven't uttered the word "Centronics" since the early 90's. heh
You can't add WPA2 unless the manufacturer released a firmware update to support WPA2.
Being an old tech, there weren't many Centronics wireless adapters made back then.
WEP is fine for print server, it's not like you're ...

Hi!

Is it possible to modify the D-Link dp311p wireless printer server witch has only WEP encryption with WPA/WPA2-PSK encrypion?

cause there is no other centronics wifi printerserver available I think.

Thanks

Klaus

Hi I found this listed bands on an austrian forum. What is the command to put them inti the MR6500

LTE: B1 (2100 MHz, FDD), B2 (1900 MHz, FDD), B3 (1800 MHz, FDD), B4 (1700 MHz, FDD), B5 (850 MHz, FDD), B7 (2600 MHz, FDD), B8 (900 MHz, FDD), B12 (700 MHz, FDD), B13 (700 MHz, FDD), B14 (700 MHz, FDD ...

do you have any list with all 5G bands or where to get them?

Hi!

I am looking for all european 5g bands and wanted to know if I can buy an AT&T wireless prepaid data simcard if it exists. I am from Austroa and need to update some AT&T routers. Is there a chance to get the sim shipped oversea?

Thanks

Klaus

how can I add bands to the device for EU 5G?

by the way whats the last FW for this device?

Rich Hathaway wrote: Sat Oct 19, 2024 9:13 am
Klaus4 wrote: Sat Oct 12, 2024 4:44 am Hi how can I enable the 5G bands and is this the last firmware?

thanks

Klaus
It is enabled by default but you can turn it off/on in the admin pages

The LTE Bands are working but not The 5G bands how to make this Bands working?

Thanks

First the firmware is old and then I need Euopean bands

I have got five ATT MR 6500 with older FW... Damn I knew it earllier I wouldt bouth then they are not updateable in Austria and only on LTE bands not 5G so these I can put ino the trash basket?

AT&T Company Chat Transcript ...

Hi how can I enable the 5G bands and is this the last firmware?

thanks

Klaus

hkm2030 wrote: Wed Sep 18, 2024 9:30 am
Klaus4 wrote: Tue Sep 17, 2024 7:42 pm hi

whats the last FW for Netgrar MR6500 AT&T?

Thanks
44

what is the releasedate?

Thanks

hi

whats the last FW for Netgrar MR6500 AT&T?

Thanks

klaus Ruckerbauer

Rich have you received my skype message? Cause I had some health problems the last months

I think I need to send you two routers again.. One is not responing (its not that one you have marked as bad) and one with bootloop.

is fdt 32 or 64 bit? or both cause I have two modems with now still in bootloop again.

Thanks?

what have you done?

wherea are you from its an european device. Latest firmware https://www.downloads.netgear.com/files ... .00_00.zip just follow the steps in the first posts.

do you have used ones for sale? Cause Amazon.de is asking 1000€ or more...

there is oone on ebay for 199USD with bootloop.

is there any Firmwarepdate for the M6 available for downloading?

Thanks

Hi!

HHHHow can I unlock all bands`
Thanks

Ok ill contact you later via skype

If ill send it to you how long would it take to recover it?

Bye the way how far from the Speedway. Maybe friends willtravel the Nascarrace

tokarool wrote: Tue Mar 07, 2023 4:45 pm @Rich Hathaway I am from EU too... if massage about mail it was to me becouse you not confirm is brick? Can I do something else?

where exactly?

Send it from Austria to USA i Thinks its to expensive. I have a 400 mbit stable connection.

Can you please give me the commandline for this with Zoomtext 400% is it hard to read all the postings correctly.

Thanks

Rich Hathaway wrote: Tue Mar 07, 2023 5:13 am If no FDT will work then likely somehow you broke the bootchain and need a full load from emergency mode (9008)

how can i get this emergency mode [9008] with Windows 7?

Thanks

I need a fullflash of an ATT device.

Thanks

same issue here I tried some spks. is it because of the drivers? Or Windows 7/10? I can exclude Zoomtext. it is not the problem with the screenenlager

the problem is that the wheel after the Netgearlogo turns and turns more than two hours

like this

is there any firmware diffrence between 1anas and 2a1nast?

Next week I will go to a 3d scanning and printing shop.

By the way I have got two more devices one is not powering up. No led flashin or something else. And one with always tries to power up but it doesn not. This device i have flashed serveral times but no changes. So are they really dead or is ...

do you have a fullflashfile?

Thanks

@rich do you have them?

yes for printing 3d spareparts

Does anyone have a stl file from the complete housing?

oThanks all is working but i lost some screws witch one can I use ore are nearly the origrinal.

thanks

how can i set it to auto cause ATT&T is still set as active.l

it showes unlocked but will not work with austrian cards. Is it only a batterycharger or not?

please can you explain how to make this file? and will be the Imei and other serialnumbers be storen in the backup?

do you have any idea where to get the full download?

jericsmith wrote: Sun Jan 29, 2023 2:18 am
Could you share what you did to fix it? Thanks!

viewtopic.php?p=26543#p26543https://wir ... 543#p26543

Hi!

I solved the bootloop but wanted to change to the EU FW. But it didn´t work out is there any fullflash for the EU version one I can use for a try to reflash it.
thanks

by the way is it unlocked after the new flash?

I fixed it. It still have ATT Firmware in it but I hope that it will work in the EU

Thanks

do you have link for the Fdt?

Thanks

I will try to put in the EU version in a boot loop ATT. How can I make a backup from my EU version. for flashin in the ATT

Hi!! I am not able to run the FDT cause it says no sdk file. Does anyone have one? for me or how can i Create one?

thanks

Klaus

PS I have an ATT device and live in Austria. I have an identical EU router so is there any solution to get the FW out of my EU router and puti in the ATT?

Search found 51 matches