Wireless Joint

Did you figure out why your router won't connect?...from the log, it looks like you are trying to connect to 5G NSA only, I don't think that will work...I think you at least need some LTE bands to get connected.
regards,
RJ

Hi Dan, I use a wg1608 with a EM160R-GL...I did have a few issues with the EM160 disconnecting, especially after aggregating...I believe Quectel did fix the problem after they issued firmware version EM160RGLAUR02A09M4G for the EM160R..I also do a daily reboot and have not had anymore issues with it ...

No I was not aware of the new feature. Most of the Modem suppliers are now updating the firmware to support the new MTU requirements. ATT has changed their network requirements in the first Qtr of 2022 for Firstnet (Band14) The Mofi unit my friend was running was unstable and dropping until I ...

I tried a Mofi4500 with the correct settings on ATT band 14 vs a WG1608 with just the default settings and the Mofi was getting quite a bit more speed..I'm not sure if you can even set the MTU on the WG1608..nothing I tried really made a difference.
Thanks

Has anyone played with the MTU setting on the WG1608?...ATT started requiring an MTU of 1342 for Firstnet (which is band 14)..If the MTU is higher then this the performance is taking a big hit...I have searched and only found some people had that issue with the Mofi 4500, which Mofi actualy has a ...

Sorry, I used it and for some reason I cannot delete this post.

Are you still having this issue?...I have a similar issue with the EM160R. I get the transmit queue timeout error at least once a day and have to reboot. The only I did notice is it will happen most often during carrier aggregation.

I have a new Quectel EM160R-GL for sale. It is still sealed in the OEM package.
It is a production model so I assume it has the latest firmware on it. I wanted to leave the package sealed, so I did not check it.

Let me know if you are interested.
Regards,
RJ

Ethernet to PC...the Modem at first would not connect..I changed the interface to Static IP and the modem connected via Hostless with 192.168.0.1 The router didn't like it so I had to set the EM160R to MBIM mode with the AT+QCFG="usbnet",2
command. The router came up immediately after changing the ...

I had that problem with the 850 before...I had to try different software releases to find the best fit for ATT..ended up sticking with the 6.50 software release due to the updated modem firmware

Hi, I just got a new WG1608 with an Quectel EM160R Modem. I'm having issues getting the router connected to the internet.

I can get the modem to connect by changing the WAN1 network interface to a static IP setting and it automatically gives me 192.168.0.1. It gives me a message in the log ...