Wireless Joint

I would like to find out where to find this router along with supported modems. This model shows up in Google, but there seems to be some kind of clones out there too. I ask this of course because The Wireless Haven is not taking orders. The website is not viewable either. Thanks. Here are some of ...

I have it now. The spread sheet calculator wasn't giving the right combo number. I became self explanatory as I looked at it closely. These are the commands to get bands 2 and 12 plus combine them as an option. AT!BAND=02,"B2", 0, 2 AT!BAND=03,"B12", 0, 800 AT!BAND=04,"ATT 2,12",0, 802 Run this ...

You can ssh into it and do a band select then go back into the interface and just select the band you want. Example: https://www.youtube.com/watch?v=GtqLH6yzqdM I can set it with commands to select the band I want no problem. I've tried the spread sheet to combine bands and it causes the M1 crash ...

I put a post here related to this issue. Thanks.
http://wirelessjoint.com/viewtopic.php?f=16&t=364&p=9548#p9548

I have a grandfathered Unlimited plan. These plan are legitimate. It has a phone number associated with it and I receive confirmation of data use from AT&T on my MR1100 Nighthawk. I did have one of those phased out reseller plans and they simply shut it off one day and that was it. I too have been ...

I just tried this single (AT!BAND=10,"B2",0,2)command after the reset so there were no command inputs before this. I'm using Putty to upload commands. After this command I rebooted and what come up in the browser is the top portion of the login screen, nothing else. The screen on the MR1100 is blank ...

I tried the spread sheet on my MR1100. I probably used the wrong command and for a minute I thought i'd made it bran dead. I did a hard reset, but it did not respond normally however it did come back on and was reset. I put these three commands in one at a to. It accepted them with OK. I wanted to ...

Thanks that was very helpful. So you use 2 bands at the same time? That's interesting, I 'll have to research that some more.

https://www.kuwfi.shop/product/Kuwfi-300-Mbps-3-G-4-G-car-WIFI-wireless-router-extended-strong-signal-openwrt-car-WIFI-router-with-usb-port-SIM-card-slot-and-external-antenna-for-the-US-%2F-Canada-%2F-Mexico-SIM-card-network-700-%2F-1700mhz-2193.html This is a router I’ve been looking at. I would be ...

Does GoldenOrb access the modem? I have AT&T with bands 2,12 and 66. I know the modem is separate. I was given three options by BJ at The Wireless Haven. Is there any advantage of one over the others? Thanks. Quectel EC25-AF CAT4: https://thewirelesshaven.com/shop/modems/quectel-modems/quectel-ec25 ...

I see this router has GoldenOrb firmware installed. I did not see an option to lock to a desired LTE channel. Can that be achieved with this setup? I've had some posts about my MR1100 Nighthawk setup, but I was logging in with my facebook (Scott Flora)account and that option did not come up this ...