Wireless Joint

Didneywhorl wrote: Wed Jan 06, 2021 11:51 am By clicking edit next to the rule there in your picture.

Unfortunately that does not provide a place to edit the port number, that I can see.

Didneywhorl wrote: Thu Dec 24, 2020 12:44 am One day I will play with the VPN stuff.

Hopefully a VPN guru that knows the rooter and WiFiX firmware chimes in.

Can you change it in the UI and it stay changed?

How do you change it in the UI? I don't see where the port field can be edited.

NEX6QGO running GoldenOrb_2020-04-04

I used an OpenVPN ovpn config file to setup my VPN in WiFix. It contains the server and port. The port is 1912.

Screen Shot 2020-12-15 at 10.21.30 AM.png

Why is WiFix using a different port than what is specified in the ovpn file?

Screen Shot 2020-12-15 at ...

a) how random are those reboots?

b) are we talking about reboots or reboots and shutdowns (i.e. the router does not come back to life automatically)?

c) if you have a chance to watch the reboot process (for example you can run InternetConnectivityMonitor


a)The period the router runs ...

I've tried a new 3.5A PSU and reboots persist.

https://smile.amazon.com/gp/product/B01 ... UTF8&psc=1

This is the third PSU.

I'm currently using a 12V 3A PSU, but per your suggestion I will try a second upgraded PSU.

I confirmed that Connection Monitoring, Scheduled Reboot, and Pint Test are all disabled.

Thank you for your input.

I purchased it from The Wireless Haven about a month ago.

I have successfully updated firmware to GoldenOrb_2020-05-16 and the reboots persist.

I have a one month old WE826-GO that seems to reboot itself randomly. I use LTE for internet, via MC7455, and it is not that the internet disconnects, but the router reboots. The WiFix network is not visible from PC for about two minutes and then when the WE826-GO boots back up it reconnects ...

GrandPooh-Bah wrote: Sun Mar 01, 2020 1:37 pm Yes I did with Torguard.

Please detail the steps to do this. I've yet been unable to get Torguard working on the WE826.

For those who are still having difficulty connecting on Visible, from what I've read they work off of IPV6 only, so try this which will also set it to auto-scan and LTE only. You may also have to try both QMI and MBIM modes.


AT!ENTERCND="A710"
AT!BAND=00
AT!SELRAT=06
AT!CUSTOM="IPV6ENABLE",1
AT ...

I ran the following commands on my modem to try to get it to work with visible:

at!entercnd="A710"
at!usbcomp=1,1,1009
at+cgdcont=1,"IP","VSBLINTERNET"
at+cgdcont=1,"IPV4V6","VSBLINTERNET"
at!reset

Might that be causing me problems? My modem currently is in MBIM mode, As it will not connect at ...

Don't you already have the latest generic firmware already installed on your modem?

See your post: https://wirelessjoint.com/viewtopic.php?f=8&t=669&start=30#p8613

I'm using generic, but it looks like I have an earlier version (despite mofi saying that it's the latest)


Stating the obvious ...

I think that, unfortunately, the WiFix firmware does not support modem firmware-flashing.

I have ordered a Mini PCI-E to usb adapter with SIM slot. I think that I should try this firmware:


Any thoughts or suggestions?

The modem was included in the MOFI4500-4GXeLTE-SIM4_COMBO that I purchased in January of this year.

0:[ATi3]
1:[Manufacturer: Sierra Wireless, Incorporated]
2:[Model: MC7455]
3:[Revision: SWI9X30C_02.30.03.00 r7804 CARMD-EV-FRMWR2 2018/07/25 01:10:04]
4:[MEID: XXXX]
5:[IMEI: XXXXX]
6:[IMEI SV: XX ...

I re-read the thread and noticed that your MC7455 has a different firmware to mine:

0:[AT!impref?]
1:[!IMPREF:]
2:[preferred fw version: 02.30.03.00]
3:[preferred carrier name: GENERIC]
4:[preferred config name: GENERIC_002.046_001]
5:[current fw version: 02.30.03.00]
6:[current carrier name ...

gscheb wrote: Sat May 30, 2020 9:52 am See hr245b said he set his to LTE only. Have you tried that?

Thank you for the input. Yes, I tried LTE only.

I re-read the thread and noticed that your MC7455 has a different firmware to mine:

0:[AT!impref?]
1:[!IMPREF:]
2:[preferred fw version: 02.30.03.00]
3:[preferred carrier name: GENERIC]
4:[preferred config name: GENERIC_002.046_001]
5:[current fw version: 02.30.03.00]
6:[current carrier name ...

Thank you for the reply. I see that you have the SIM4 version. There are multiple versions including that, and SIM7, and V2.

I also tried the SIM4 version but could not make it work on visible.

My guess at present is that you must have just gotten a “good one.”

hbr245b wrote: Fri May 29, 2020 10:52 pmI can confirm that my Mofi has an MC7455 and Visible works fine by selecting the correct APN from the drop down list and then rebooting the Mofi. TTL65, service mode LTE only.

How do you know that the mofi has an MC7455? I previously had a 4500 and it would not work on visible either.

gscheb wrote: Fri May 29, 2020 10:25 pm Try these commands to go to QMI mode and see if it works.
at!entercnd="A710"
at!usbcomp=1,1,10d
at!reset

I tried QMI mode and the modem is never able to connect to visible. In MBIM mode it connects but data never works.

Thank you for your suggestion.

Any recommendation on another modem to try with the WE826GO-U?

Maybe I should just buy a different modem? Currently I am unsuccessfully trying to get working the WE826GO-U with MC7455 on Visible.

Back to a previous question: I also want to test this hardware on AT&T. Do I need to “back out” any of those AT command issued to the MC7455 to test on AT&T?

Going to try it myself and see what happens. Will report back my results.


I look forward to your results.

I also have an AT&T SIM to test in this router. Do the AT commands that I issued need to be backed out for AT&T to work? I know that I need to update APN to broadband.

Thanks again for ...

terryjett wrote: Fri May 29, 2020 4:37 pm Yea, do a few speed test over at https://www.bing.com/widget/t/speedtest

While the speed test is running, do a few

Code: Select all

at!gstatus?

and see if things look different than one you posted.

Unfortunately, no data will load so I cannot do a speed test, even through apps.

5.png


at!gstatus?
!GSTATUS:
Current Time: 194 Temperature: 40
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B13 LTE bw: 10 MHz
LTE Rx chan: 5230 LTE Tx chan: 23230
LTE CA state: INACTIVE LTE Scell band:B4
LTE Scell bw:20 MHz LTE Scell chan:2050
EMM state ...

at!IMPREF?
!IMPREF:
preferred fw version: 02.33.03.00
preferred carrier name: GENERIC
preferred config name: GENERIC_002.072_000
preferred subpri index: 000
current fw version: 02.33.03.00
current carrier name: GENERIC
current config name: GENERIC_002.072_000
current subpri index: 000

...
Would make sure you are running generic firmware though.

One other thing you can try is using custom firewall setting. Uncheck your 117 setting and enter this manually. Paste the below into "Custom Rules" (make sure there are no other rules and if they are, place a # at beginning of each line ...

I've just tried all available TTL values with no change. Modem information follows:

at+gmi
Sierra Wireless, Incorporated

at+gmm
MC7455

at+gmr
SWI9X30C_02.33.03.00 r8209 CARMD-EV-FRMWR2 2019/08/28 20:59:30

No success yet.

I did the following:
1. Installed the MC7455 into the WE826GO-U
2. Booted the router and applied the following AT commands:
at!entercnd="A710"
at!usbcomp=1,1,1009
at+cgdcont=1,"IP","VSBLINTERNET"
at+cgdcont=1,"IPV4V6","VSBLINTERNET"
at!reset
3. Confirmed that APN was set to ...

Hello,
beausmith94 is the one who got it to work and started this thread. I used his work to set up some other devices.
More about what modem you have? Then that you have a we826.
And yes at commands to set it up.


I have the MC7455 in the WE826 with the GoldenOrb/ROOter firmware.

I believe ...

gscheb wrote: Tue Dec 03, 2019 11:57 pm After got this going realized needed to keep my WE826 ...

@gscheb,
You mentioned that you got it working with a WE826. Will you please explain in detail how you did that?

Do you need to manually configure the modem via the GoldenOrb UI?