Wireless Joint

May want to contact InvisaGig directly: https://invisagig.com/contact-us/

EDIT: There is also this Facebook group but not officially for support: https://www.facebook.com/groups/invisagig

Kind of late but this works for me with latest AB version:

Name: Modem Connected

LED Name: rbg.green

Trigger: Network device activity (kernel netdev)

Device: wwan0

Trigger: Check one, two or all. (whatever you want it will flash on data if transmit/receive checked)

Do you have the latest firmware? https://drive.google.com/file/d/1rPO4wd ... R7B7c/view

Been lots of chatter lately about verizon and visible going to crap with various issues. It does seem something has changed. Only thing I can suggest is try some different TTL settings and see if helps stop the hotspot bleed, 65,64,67 etc.

prasta wrote: Mon Aug 02, 2021 2:38 pm Hey Klawk, did you get this figured out? I just got my router and sim in the mail today, and having similiar issues!

Did you already try the first reply steps?

That would be great, very intimidating the first time it comes up, kind of an OMG moment. Props to anyone who can actually make sense of Chinese, other than them of course.

I'll admit when I'm stupid so will do another follow up. Came back and did search for Breed Recovery Console and sure enough a 1+ year old page on it here. So posting for anybody else who is gobsmacked when first seeing that recovery menu. https://wirelessjoint.com/viewtopic.php?t=779

Figured it out by saving to PDF then translating. Boy that is one busy recovery menu!

Anybody got a breakdown decipher of recovery menu? That thing is jammed with stuff and want to be sure I'm pushing the right buttons. Want to flash the wifix 19.07.6 firmware. Any guidance much appreciated!

They definitely take A LOT of patience. It sometimes takes me a good 15-20 minutes to get them on. Other times they go on very quickly. Kind of a luck of the draw getting them on but I do have a small magnifying glass which helps to at least get them lined up before applying pressure. Always afraid ...

So I couldn't leave things alone and had to get to the bottom of this. What is killing the internet connection in all the different firmware I tried is when Traffic Monitoring>Enable IP Traffic(per IP monitoring) is enabled. It seems the translation is broken if in IP passthrough mode the cba850, at ...

Well, the tomato setup started acting up, would intermittently lose internet and access to the 850 from the router. So, I broke down and flashed the newest Asus firmware for the RT-N66U and it seems stable since this morning so will see if it lasts. Can say it definitely appears any 3rd party ...

Success! For whatever reason simply could not get the RT-N66 to connect to the Cradlepoint with stock, Merlin or Goldenorb firmware. One last attempt with Tomato and it worked. Yippee! Didn't have to mess with anything just used the passthrough port on 850 to the WAN on the Asus and it connected no ...

But essentially whether you have the CP set to DHCP or IP Passthrough you should be able to plug it into the WAN port of your Asus and have it talk.


That's what I thought too but not so for me, Only thing I haven't done is a total reset on the 850 but not ready to go down that road right now ...

Well, I guess the only way is in access point mode unless someone knows a way to get the external router to work in normal DHCP mode with CBA850 DHCP disabled. Never could get passthrough to work. Followed 2 different guides.

1. http://blog.industrialnetworking.com/2018/09/cradlepoint-cba850-first ...

OK, so i'm having a big time brain fart going on here. Simply trying to connect an Asus RT-N66 to my Cradlepoint CBA850 and having a heck of a time getting them to talk. Have tried all different ways such as through LAN port with router assigned static address on asus wan of the 850, connected to ...

And don't forget to factor in cable loss. Long runs with cheap cable can negate antenna gain.

Well i may have found the string i needed but would like confirmation so i don't do something crazy and brick my modem for Sierra modems it seems to be this

AT!SELRAT=06

would this be correct for LTE only bands?


Don't have those modems but have several other Sierra models (7455/7354). Should ...

Thanks BillA, those are some of the things I tried already. All leds work except the power. Not that big of a deal just have to know can't rely on it for indicating power is on. But WiFi works so it will indicate router is on when it connects. I've seen on other sites people have the same problem ...

BTW, to you know the version of openwrt or ROOter i should use for the Mofi4500 V2?


I successfully loaded the WiFix version of GoldenOrb WE826 on my MoFi4500V2. You have to do it with the recovery flash procedure. So assuming any version of OpenWrt for WE826 should work. Only glitch I've found ...

So I have a mofi 4500 V2 router, 2 WirEng wide band antennas(dont worry i didnt pay for them), and using ULLM240 cable, 25ft. I will probably shorten.


Could be hurting yourself with the LM240, personally wouldn't use it for anything over 10 feet. I have a 25 ft run and using LMR400.

Also ...

Very interesting and timely since I just ordered one to try especially with all the AT&T changes happening.

Found out I should have coverage on their (T-Mobile) new 600MHz band which they are basically calling 5G for rural areas. Guess we'll see.

I'll plan to post back when I get it and have time ...

Any plans to release a WiFix version of the new GoldenOrb?

EDIT 9 March: See they are now available. Thanks!

If using the Radome antennas I will need to place this within two feet of a microwave oven, from what I can tell microwaves operate near the 2.4Ghz wi-fi spectrum, so I don't think it will interfere much if at all with the 4G bands. Please correct me if I'm wrong or if there are other concerns ...

Did you follow the procedures in the link? It does take some patience but you should be able to access the boot flash screen by Ethernet if successful. Again, the constant ping helps to know when to release the reset button. It sounds like you are going past the time. The ping command in Windows ...

I think it might be time to try flashing the router firmware in recovery mode: https://wirelessjoint.com/viewtopic.php?f=12&t=5

The constant ping mentioned in the comments really helps to know when the computer sees the router and to release the reset button.

Thanks JimHelms, I've played with that setting and have the latest WiFix installed. I was looking more to do scheduled reboots (cron)and this has fixed that. I'd have to check again but seems my modem didn't reconnect when trying The Wireless Haven Ping option. I got really frustrated because no ...

I had this issue as well.

WE826-T2 on GoldenOrb_2019-03-10 with mc7455 in QMI mode. When I enabled the Scheduled Reboot feature, I too was waking up with no WAN connection and was doing a hard power cycle to resolve.

Instead, try this if you desire a daily reboot:

First, disable the Scheduled ...