Wireless Joint

I'm going to pull the trigger on building a WG3526-P w/ EM7565 but i'm going to be mounting it in a nema box on the outside of the house to keep the antenna cables as short as possible. I want to do the POE setup but wanted to know if the Ubiquiti US-8-150W would support it. If not, I can get the ...

Read through that post Jim and the solution seems to have worked. I have gotten it to where i can detect the WWAN port and even got the firmware to write, but the issue i'm seeing now is that i downloaded the generic firmware for the 7511 from sierra's website, but every time i go to load it, it ...

Not sure if this is the right section for this question, so if it needs to be moved please do so. But here goes. I'm honestly not sure what i've done. Here's a quick rundown of what i've attempted to do. 1) I got goldenorb loaded up on the raspberry pi 3b+ and it seems to be working fine. 2) I ...

@motoguy

Have you got around to finishing this setup? Any results? I'm in the process of doing the same thing you are, and essentially the same thing swwifty did. Run into any issues?

Replied to your PM,

and will definitely look into the switch for the cleaner install.

Any recommendations on a switch?

Apparently i've got some more research to do. So here is what i'm trying to accomplish so maybe you can point me in the right direction. I want to be able to hard wire a few items in (couple of playstations and a PC), but also be able to have wireless access for phones, ipads, apple tv, etc. Judging ...

Appreciate the info! I'll do some more reading on all of it tonight. I believe i have everything ordered that i'll need, and your are right, i think i will do a quality router for inside the house for all the other accessories to connect to. I plan on doing an outside mount as you did with the Pi so ...

@Swwifty Just recently ordered a setup to match what you have here, except i ordered the panel antennas instead of the yagi's. I currently have a Mofi4500 w/ AT&T sim, and while speeds are decent, after seeing your setup, i realized that there was much more to be had. I also ordered the EM7511 as it ...