Wireless Joint

Does anyone have the newer modem firmware (at least revision EP06ELAR03A08M4G/EP06ELAR04A01M4G) that supports the AT+QUSBCFG="SS" command, to turn off USB3, for the EP06-A modem? I have EP06ALAR02A07M4G currently.

It would be so nice if you could upload this to me since Quectel Support are such ...

Okay, good. The 22981 LAC is just a general area code, not a precise locator. Obviously you know where you are; I was just demonstrating how to find the tower from just the modem connection details.

Your first question was how to find the tower and see it on a map. I hope you can see now that the ...

Okay, I'll just get you started on this long, complicated process. First of all, your Network (HSPA) and cell ID (41663) indicate a non-LTE (slow 3g) connection. Probably because you are too far away to get an LTE signal. Before you do anything go here: https://opencellid.org/#zoom=15&lat=34.44606 ...

Oh I know how challenging this is to get a good working setup. May I suggest before you go buying expensive cables: Take the LB1120 up into the attic and measure the signal strength without an external antenna. With the LB1120, whatever signal you get with the internal antenna is only going to be ...

This has been quite the challenge getting GoldenOrb Rooter flashed onto RBM11G and flashing the EM7565 to the latest GENERIC_002.019 firmware. I thank everyone here for being so clever and helpful.

I just have not been able to get more than 29Mbps using QMI mode or 24Mbps using MBIM mode from ...