Page 1 of 1
WE | WG Recovery Mode Chinese Language
Posted: Mon Jul 16, 2018 7:36 pm
by Dairyman
Those of you that have to use the Recovery Mode on a WE | WG router will have the pleasure of looking at a Chinese language screen. While it isn't hard to figure out what should happen, it is nice to know exactly what is being said here.
I've translated the recovery page so you can see what is what.
Chinese screen
flash_cn.jpg
English screen
flash_en.jpg
Re: WE | WG Recovery Mode Chinese Language
Posted: Fri Aug 10, 2018 11:38 am
by serverside
I need to take photos of mine as they have a new screen on the WG3526.
Re: WE | WG Recovery Mode Chinese Language
Posted: Tue Jul 07, 2020 10:04 pm
by farberm
Anybody willing to post new images of the Chinese screens to upload goldenorb from recovery mode on zbt router
Re: WE | WG Recovery Mode Chinese Language
Posted: Mon Jul 13, 2020 1:08 am
by BillA
farberm wrote: Tue Jul 07, 2020 10:04 pm
Anybody willing to post new images of the Chinese screens to upload goldenorb from recovery mode on zbt router
I've noticed that the latest version WG3526 bootloader, no longer requires the IP to be set to a specific value on the pc.
Unplug the power cable, hold down the reset button, inset the power cable, count to 5 seconds, release the reset button then go to > http://192.168.1.1/index.html < This is important, not just 192.168.1.1!
Click the large button in the middle of the screen, select the file, and wait till the flashing has finished.
Here's a detailed guide of the above.
viewtopic.php?p=6007#p6007