Wireless Joint

Is there one available?

Selecting a manual will be dependent on what firmware you are using.

Here is the OEM User Manual for the WE826:


If your running GoldenOrb, there is a lot of information HERE.

Since GoldenOrb is based on OpenWRT, you will find some good information HERE.

Thank You!

I'm trying to attach a Linksys WRT3200acm as the preferred whole house router (2.4ghz 5ghz) . I'm assuming this should be plug and play. However, read somewhere that I needed to change the default IP on the WE826 router? Advice?

You can DMZ everything from the WE826 to the WRT3200ACM and let it handle all the routing and wifi.

Thanks again....this is a great help!