Page 1 of 1
Telnet pass Nighthawk
Posted: Wed Oct 02, 2019 8:00 am
by coromi52
Need help login in through Telnet for me to add individual bands. It is an Att nighthawk m1
I need
AT!ENTERCND="password"
Anyone? thanks
Re: Telnet pass Nighthawk
Posted: Sat Jan 04, 2020 8:33 pm
by BillA
If they actually use a Sierra brand modem, then you can try:
AT!ENTERCND="A710"
These sort of things can sometimes be a problem with proprietary modems/routers, that's why OpenWRT is preferred.
Re: Telnet pass Nighthawk
Posted: Sat Jan 04, 2020 8:57 pm
by saw2645
Re: Netgear MR1100 at!entercnd NOT "A710"
I know this is an old post, and hope you figured it out, but there is no password required on the nighthawk M1. You just need to have the usb c of the M1 connected to the usb of your pc. I use putty to ssh into the ip of the M1 and port 5510. I hope that helps.
Re: Telnet pass Nighthawk
Posted: Sat Jan 04, 2020 9:15 pm
by BillA
saw2645 wrote: ↑Sat Jan 04, 2020 8:57 pm
Re: Netgear MR1100 at!entercnd NOT "A710"
I know this is an old post, and hope you figured it out, but there is no password required on the nighthawk M1. You just need to have the usb c of the M1 connected to the usb of your pc. I use putty to ssh into the ip of the M1 and port 5510. I hope that helps.
Would you happen to know what's the make and model of the modem used in the Nighthawk M1?
Re: Telnet pass Nighthawk
Posted: Sun Jan 05, 2020 8:04 am
by saw2645
BillA wrote: ↑Sat Jan 04, 2020 9:15 pm
Would you happen to know what's the make and model of the modem used in the Nighthawk M1?
No, sorry I don’t know that.