Wireless Joint

Posted: **Sun Sep 15, 2019 7:22 pm**

Hello again,

after playing arround now 2 more hours i got it to work to rebrand my DELL DW5811e module to the Sierra generic one.

I flush the Images and reflashed the module with the latest Sierra Generic firmware:
9999999_9904609_SWI9X30C_02.32.11.00_00_GENERIC_002.064_000

I also installed the GenericDriverSetup_4836 on my Dell notebook with Windows 10.

All goes well but my module is still not working.
After doing some AT checks i found out, that there is no Carrier PRI installed or enabled.

So how can get this to work, that my Carrier PRI is not "none" and the missmatch is a match?

Thanks again for your help!

Code: Select all

AT!USBPID?
!USBPID: 
APP : 9071
BOOT: 9070


AT!USBVID?
!USBVID: 
1199


AT!USBPRODUCT?
EM7455


AT!PRIID?
PRI Part Number: 9904609
Revision: 002.064
Customer: GENERIC
Carrier PRI: None


at!impref?
!IMPREF: 
 preferred fw version:    02.32.11.00
 preferred carrier name:  GENERIC
 preferred config name:   GENERIC_002.064_000
 preferred subpri index:  000
 current fw version:      02.32.11.00
 current carrier name:    
 current config name:     
 current subpri index:    000

 carrier name mismatch
 config name mismatch


AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID   BUILD_ID
FW   1    GOOD   1   0 0      ?_?         02.32.11.00_?
FW   2    EMPTY  0   0 0                  
FW   3    EMPTY  0   0 0                  
FW   4    EMPTY  0   0 0                  
Max FW images: 4
Active FW image is at slot 1

TYPE SLOT STATUS LRU FAILURES UNIQUE_ID   BUILD_ID
PRI  FF   GOOD   0   0 0      002.064_000 02.32.11.00_GENERIC
Max PRI images: 50

Posted: **Mon Sep 16, 2019 9:22 am**

Not sure, but you may try flashing the firmware a second time.

You might refer to THIS document.

Posted: **Mon Sep 16, 2019 10:40 am**

Hello,

i already read your document 100 times but can't find any solution for my problem in them.
My COM ports are working and i can connect via Terminal to the card. I also can flash the card, but the PRI will not be activated on the card.
i tried now to flash several times again, but again the same problem.

i also tried this now:

Code: Select all

AT!ENTERCND="A710"
AT!IMAGE=0
AT!RESET

Then i flashed the previous firmware 9999999_9904609_SWI9X30C_02.30.03.00_00_GENERIC_002.046_001.exe

after that i did this:

Code: Select all

AT!ENTERCND="A710"
AT!PRIID="9904609","002.046","GENERIC"
AT!RESET

but also the same problem:

Code: Select all

AT!PRIID?
PRI Part Number: 9904609
Revision: 002.046
Customer: GENERIC
Carrier PRI: None


!IMPREF: 
 preferred fw version:    02.30.03.00
 preferred carrier name:  GENERIC
 preferred config name:   GENERIC_002.046_001
 current fw version:      02.30.03.00
 current carrier name:    
 current config name:     

 carrier name mismatch
 config name mismatch



AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID   BUILD_ID
FW   1    GOOD   1   0 0      ?_?         02.30.03.00_?
FW   2    EMPTY  0   0 0                  
FW   3    EMPTY  0   0 0                  
FW   4    EMPTY  0   0 0                  
Max FW images: 4
Active FW image is at slot 1

TYPE SLOT STATUS LRU FAILURES UNIQUE_ID   BUILD_ID
PRI  FF   GOOD   0   0 0      002.046_001 02.30.03.00_GENERIC
Max PRI images: 50



ATI
Manufacturer: Sierra Wireless, Incorporated
Model: EM7455B
Revision: SWI9X30C_02.30.03.00 r7804 CARMD-EV-FRMWR2 2018/07/25 01:10:04
IMEI: 359073060005307
IMEI SV: 17
FSN: LF511200380302
+GCAP: +CGSM


AT!USBPID?
!USBPID: 
APP : 9071
BOOT: 9070


AT!USBVID?
!USBVID: 
1199

Any other idea how to get this GENERIC PRI to work?
Maybe i forgot something?

Posted: **Mon Sep 16, 2019 1:12 pm**

I think i give it up.
i flashed now back the 01.08.07 firmware from Dell and the card works instantly.

i follow this thread: https://forum.sierrawireless.com/t/firm ... 0/12829/35

Code: Select all

fdt2.exe -d 9x30 -f 1102424_9904336_EM7455_01.08.07.00_00_Dell_001.001_000.spk

i think the problem is that i have a engineering DW5811e card and this one maybe doesn't allow newer firmware versions on it. i don't know. even if i try to update the firmware now to the latest dell firmware, i fall back into the LPM....

really don't know whats going on here with this card...

my card is this one:

Code: Select all

Recieve: AT!HWID?
Recieve: Revision: 0.2
Recieve: OK

The left one:

Wireless Joint

my EM7455 has no carrier pri and a carrier/config name missmatch

my EM7455 has no carrier pri and a carrier/config name missmatch

Re: my EM7544 has no carrier pri and a carrier/config name missmatch

Re: my EM7455 has no carrier pri and a carrier/config name missmatch

Re: my EM7455 has no carrier pri and a carrier/config name missmatch