Page 1 of 1
to be able to see what band I am using
Posted: Sat Aug 17, 2019 1:46 pm
by photoacer
I am using Firmware Version OpenWrt SNAPSHOT r9614-b61495409b / LuCI Master (git-19.065.57576-61ea3ed) the model name is WE826-T2 I do not see what band I am using is there a way to see that I like the Firmware it stable and it runs faster the golden orb I have an MC7455
Re: to be able to see what band I am using
Posted: Mon Aug 19, 2019 2:51 pm
by swwifty
I imagine you'll have to use some software to send AT commands to the modem if you are just using plain old openwrt.
Maybe try the tool 'screen' ?
Re: to be able to see what band I am using
Posted: Mon Oct 21, 2019 3:21 am
by photoacer
what the tool screen?
Re: to be able to see what band I am using
Posted: Mon Oct 21, 2019 10:58 am
by swwifty
This is the tool I'm talking about:
https://www.gnu.org/software/screen/manual/screen.html
You should be able to install it, then just run "screen /dev/YOURMODEMDEVICEHERE"