Wireless Joint

I have the MR6500 flashed with the MR6450 firmware and all is working well, except Band selection. It is currently connected to T-Mobile network in Germany and I do get reasonable speeds, but it could be better. I expect it has to do with the fact that the N78 band is not added to the modem as per below output:

Can anybody tell me what the hexcode for that band is, so I can add it through telnet. Or better even...give me some more details on the band selection and commands...I am so close to having it work perfectly the way I want...just the last details...

AT!GSTATUS?
at!GSTATUS?

Unsupported at command
at !gstatus?
at!gstatuss?

Current Time: 1244 Mode: Online
System Mode: LTE B3 PS State: 5GSUB6
EMM state: Registered
RRC state: Connected

PCC:
LTE band: LTE B3
LTE Rx chan: 1300
RSSI (dBm): -72.1
RSRP (dBm): -108.4
RSRQ (dBm): -12.9
Tx Power (dBm): 2
LTE Cell ID: 30612225
Physical Cell ID: 58
TAC: 13802

OK
at !band=?
at !band=?
Index, Name, GW_Mask LTE_1-64 LTE_65-128 NSA_1-64 NSA_65-128 NSA_257-320 SA_1-64 SA_65-128 SA_257-320 Mode
00, All (3G+4G+5G), 0002000004C00000 000000000000285F 0000000000000002 0000000000000012 0000000000001000 0000000000000000 0000000000000012 0000000000001000 0000000000000000 0
02, 4G, 0000000000000000 000000000000285F 0000000000000002 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 1
03, 4G+5G, 0000000000000000 000000000000285F 0000000000000002 0000000000000012 0000000000001000 0000000000000000 0000000000000012 0000000000001000 0000000000000000 0

0000800000000000 - LTE B48
0000200000000000 - LTE B46
0000000020000000 - LTE B30
0000000010000000 - LTE B29
0000000000002000 - LTE B14
0000000000000800 - LTE B12
0000000000000040 - LTE B7
0000000000000010 - LTE B5
0000000000000008 - LTE B4
0000000000000004 - LTE B3
0000000000000002 - LTE B2
0000000000000001 - LTE B1
0000000000000002 - LTE B66
0000000020000000 - NR5G N30
0000000010000000 - NR5G N29
0000000000002000 - NR5G N14
0000000000000800 - NR5G N12
0000000000000010 - NR5G N5
0000000000000002 - NR5G N2
0000000000001000 - NR5G N77
0000000000000002 - NR5G N66
0000000000000008 - NR5G N260

I am using mr6110 att version in vietnam and the parameters are the same as yours, 5g speed is much lower than the phone

thoi Nguyen wrote: Tue Mar 25, 2025 12:12 am I am using mr6110 att version in vietnam and the parameters are the same as yours, 5g speed is much lower than the phone

absolutely, because yours is running in 5g SA only.