Wigreguard Autostart Bug Found
Posted: Sun Oct 13, 2024 4:34 pm
I have found and confirmed a bug for Wireguard on the Wifix Nexpro, running the latest firmware, GoldenOrb_2023-11-27.
Wireguard will start and connect on boot without problems. However, if you upload a second config, even if it not used for anything at all, Wireguard will not connect at boot. Once the second config is removed, it works properly again.
Wireguard will start and connect on boot without problems. However, if you upload a second config, even if it not used for anything at all, Wireguard will not connect at boot. Once the second config is removed, it works properly again.