Page 1 of 1

UNLOCK NETGEAR MR2100 (M2)

Posted: Fri Sep 20, 2024 11:12 am
by Alparslan
Hello, I have a Netgear M2 router and it is locked to the Ooredoo Kuwait network and I want to unlock it. I tried to contact the rich but I could not reach him. Can anyone help me?

Re: UNLOCK NETGEAR MR2100 (M2)

Posted: Tue Oct 01, 2024 8:54 am
by ZzzzShinzzzZ
@Rich Hathaway he need your help

Re: UNLOCK NETGEAR MR2100 (M2)

Posted: Tue Oct 01, 2024 9:21 am
by Rich Hathaway
I wont be much help unlocking this device, I do not know much about it, I have one here but it is borked, I need a good device to make a firmware build from it and to do some study on it.

Re: UNLOCK NETGEAR MR2100 (M2)

Posted: Mon Oct 07, 2024 4:29 pm
by Hogwild
Hey Rich:

Have you attempted to connect to that MR2100 via a serial interface yet?

Re: UNLOCK NETGEAR MR2100 (M2)

Posted: Mon Oct 07, 2024 4:59 pm
by Rich Hathaway
Yes but the one I have is dead board and needs to be reloaded from 0 so far could only find 9008 mode which cannot work
because we have no loader for it yet.

Re: UNLOCK NETGEAR MR2100 (M2)

Posted: Mon Oct 07, 2024 6:01 pm
by Hogwild
Rich Hathaway wrote: Mon Oct 07, 2024 4:59 pm Yes but the one I have is dead board and needs to be reloaded from 0 so far could only find 9008 mode which cannot work
because we have no loader for it yet.
Maybe I'm misunderstanding you, but just so people are clear, "dead" usually means the hardware is fried and/or won't power on. That modem's board powers on fine. It just doesn't finish booting.

Re: UNLOCK NETGEAR MR2100 (M2)

Posted: Tue Oct 08, 2024 10:01 am
by Rich Hathaway
Hogwild wrote: Mon Oct 07, 2024 6:01 pm
Maybe I'm misunderstanding you, but just so people are clear, "dead" usually means the hardware is fried and/or won't power on. That modem's board powers on fine. It just doesn't finish booting.
When I use that term I mean the board gives no ports or try's to load any driver when plugged and does not boot which is the state this board that I have here is in, I do not have any lcd connected to it.
IMG_3594.jpg