Wireless Joint

I recently and finally fixed my boot loop issue with my MR6500.

Now onto the next issue, how do I downgrade fw in order to have telnet access and openlock and openmep activated?

Thanks.

Edit: I am currently on NTGX65_10.01.47.00
Whenever I try to telnet 5510 or 23, I get an error with putty.

My limited knowledge seems to indicate you could flash it to a MR6400 (and lose some bands that you may or may not need depending on your use case) or wait until the MR6550 firmware is widely available.

If you are on NTGX65_10.01.47.00 you should still have it working