Page 1 of 1
Att M6 pro band profile selection
Posted: Fri Dec 08, 2023 11:09 am
by vartanarsen3
Hey y’all I have the AT&T unlimited tablet plant in an M6 pro MR 6500 I’ve corrected my IMEI to iPad as well as change the apn to nrbroadband. hotspot works perfectly fine the only thing that I’ve noticed is that there’s no option in the M6 Pro to select different brand profiles but What I can do is I can take out or add bands into the main profile but I cannot have multiple profiles to select from on the go. has anyone else experienced this ? has the latest update to M6 pro added that ability the reason I’m asking is I don’t want to update for a risk of losing my modification
Re: Att M6 pro band profile selection
Posted: Sat Dec 09, 2023 8:20 am
by Rich Hathaway
So the first 2 slots are used by default, one should be 4G and one should be 4G + 5G, you are saying you cannot write slots 3 thru 9 ? if the answer is no, this usually means you are not sending the correct bitmask or just the correct command format.
Re: Att M6 pro band profile selection
Posted: Sat Dec 09, 2023 12:37 pm
by vartanarsen3
Thanks for replying . I can write slots but they do not show up in the m6pro on the go to choose from
Re: Att M6 pro band profile selection
Posted: Sat Dec 09, 2023 1:16 pm
by Rich Hathaway
if you are trying to write slots with bands and bitmask's you do not see in your devices list of bands they usually wont show up but if they do when you select them it will automatically revert back to the selection before it, I assume this is what you are trying to do is write some bands your device is not using now?
AT!BAND=? <--- This will show what bands you have available to you to use on that device.
Re: Att M6 pro band profile selection
Posted: Sat Dec 09, 2023 5:14 pm
by vartanarsen3
Thanks, what I mean is it doesn’t give me the option to select different band profiles from admin settings even though I created more than 1 band profile in dc unlocker
Re: Att M6 pro band profile selection
Posted: Sat Dec 09, 2023 8:02 pm
by Rich Hathaway
Dc cannot support anything from the newer firmwares because they cannot pass the new challenge algo
you have to do it manually without dc
Re: Att M6 pro band profile selection
Posted: Sat Dec 09, 2023 9:39 pm
by vartanarsen3
Interesting… but I used dc on it to repair imei
Re: Att M6 pro band profile selection
Posted: Sun Dec 10, 2023 11:20 am
by Rich Hathaway
That must have been before it was updated to the newer firmware and algo
Re: Att M6 pro band profile selection
Posted: Sun Dec 10, 2023 11:41 am
by vartanarsen3
It was the same time couple days ago.I repaired imei . Then I went over to edit bands on the same session
Re: Att M6 pro band profile selection
Posted: Sun Dec 10, 2023 1:54 pm
by Rich Hathaway
I see then you must not be updated to 12.xx yet
Re: Att M6 pro band profile selection
Posted: Sun Dec 10, 2023 2:07 pm
by vartanarsen3
Understood sob12.XX has hand profile selection then ? Will updating to it revert my imei ?
Re: Att M6 pro band profile selection
Posted: Mon Dec 11, 2023 8:46 am
by Rich Hathaway
vartanarsen3 wrote: Sun Dec 10, 2023 2:07 pm
Understood sob12.XX has hand profile selection then ? Will updating to it revert my imei ?
Dont update it or you will be locked out of the device as far as openmep and imei repair etc
Re: Att M6 pro band profile selection
Posted: Mon Dec 11, 2023 11:53 am
by vartanarsen3
Thanks I won’t be updating so I will never have band profile selection?
Re: Att M6 pro band profile selection
Posted: Mon Dec 11, 2023 5:15 pm
by Rich Hathaway
vartanarsen3 wrote: Mon Dec 11, 2023 11:53 am
Thanks I won’t be updating so I will never have band profile selection?
Use the mobile app it has it
Re: Att M6 pro band profile selection
Posted: Thu Dec 14, 2023 1:47 pm
by vartanarsen3
Rich seems like both web and app interface don’t allow profile selection on 6500- NTGX65_10.01.31.01 (4/16/2022)