Occasional disconnects we826 mc7455
Posted: Mon Jun 17, 2019 12:34 pm
I just built the we826-T2 + mc7455 combination and installed GoldenOrb_2018-11-03 and AT&T with 2 amp power adapter. The router came from aliexpress with an OEM firmware installed, so I used the firmware recovery mode to flash goldenorb.
I installed the modem before updating the firmware so I ran through each of the AT commands.
The disconnects aren't real frequent and only last a couple mins, but still annoying. Right now I'm primarily testing it with one computer over ethernet and occasionally jump on the wifi with my phone. All settings are default, other than the APN change to broadband for At&t.
After the last disconnect this is what I found in the system log.
Here's the modem firmware
I installed the modem before updating the firmware so I ran through each of the AT commands.
Code: Select all
AT!ENTERCND="A710"
AT!RMARESET=1
AT!RESET
After the last disconnect this is what I found in the system log.
Code: Select all
Sun Jun 16 21:51:00 2019 daemon.info dnsmasq-dhcp[2473]: read /etc/ethers - 0 addresses
Mon Jun 17 11:19:48 2019 daemon.warn odhcpd[1300]: DHCPV6 REQUEST IA_NA from 00010001215ca857d8cb8a142553 on br-lan: ok fd09:747a:fdce::4a6/128
Mon Jun 17 11:19:49 2019 daemon.info dnsmasq[2473]: read /etc/hosts - 4 addresses
Mon Jun 17 11:19:49 2019 daemon.info dnsmasq[2473]: read /tmp/hosts/odhcpd - 1 addresses
Mon Jun 17 11:19:49 2019 daemon.info dnsmasq[2473]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Mon Jun 17 11:19:49 2019 daemon.info dnsmasq-dhcp[2473]: read /etc/ethers - 0 addresses
Mon Jun 17 11:19:49 2019 user.notice firewall: Reloading firewall due to ifup of wan1 (wwan0)
Mon Jun 17 11:20:04 2019 user.notice Create Connection: Connected
Mon Jun 17 11:20:05 2019 user.notice Connection Monitor: Start Connection Monitor for Modem 1
Code: Select all
AT!IMPREF?
!IMPREF:
preferred fw version: 02.24.05.06
preferred carrier name: GENERIC
preferred config name: GENERIC_002.026_000
current fw version: 02.24.05.06
current carrier name: GENERIC
current config name: GENERIC_002.026_000
OK