Re: Bricked nexq6go-u
Posted: Fri Jun 30, 2023 10:31 am
Ive tried normal boot.
Frozen 1 red 1 blue light.
Ive tried reset button , power on , 25 second hold reset.
Frozen 1 red 1 blue light.
I then researched what the nexq6go is, and found this
https://openwrt.org/toh/zbtlink/we-826
I tried the first option, power on, then reset for 15 , same results.
Im currently acquiring all my tools to try the second method, accessing the serial port on the board , to try to replace the bootloader.
I am familiar with PIC and microchip products, so i know how bootloaders work, ive written some. I am pretty sure I used the wrong option in the chinese bootloader, to load my firmware backup, and like a dum dum went and overwrote the bootloader cause it didnt want the backup , but the actual firmware to work right.
This should mean my router is technically ok, but i need to replace the bootloader, to service it again. And the serial port I see on the board should provide for that.
Any guidance so i can get this fixed?
Frozen 1 red 1 blue light.
Ive tried reset button , power on , 25 second hold reset.
Frozen 1 red 1 blue light.
I then researched what the nexq6go is, and found this
https://openwrt.org/toh/zbtlink/we-826
I tried the first option, power on, then reset for 15 , same results.
Im currently acquiring all my tools to try the second method, accessing the serial port on the board , to try to replace the bootloader.
I am familiar with PIC and microchip products, so i know how bootloaders work, ive written some. I am pretty sure I used the wrong option in the chinese bootloader, to load my firmware backup, and like a dum dum went and overwrote the bootloader cause it didnt want the backup , but the actual firmware to work right.
This should mean my router is technically ok, but i need to replace the bootloader, to service it again. And the serial port I see on the board should provide for that.
Any guidance so i can get this fixed?