Wireless Joint

Hi All,
I see a lot of mentions of people doing IPv4 only or IPv6 only. How are people doing this in GoldenOrb/Openwrt?

I'm wanting to test turning off IPv6 but none of the IPv6 settings I see under Networking > Interfaces > EDIT (on each interface) seem to stick or actually doing any thing.

Thanks

-radec

Are you wanting to turn off the routers IPV6 NAT or the modems IPV6 connectivity to the cell network?

Didneywhorl wrote: Wed May 03, 2023 9:36 am Are you wanting to turn off the routers IPV6 NAT or the modems IPV6 connectivity to the cell network?

I guess mostly the modems IPV6 connectivity to the cell network, but really both.

I tried
Network > Interfaces > wwan(modem) > edit > selected 'IPv4' instead of 'IPv4/IPv6'

But it doesn't seem to do anything. Still get IPv6 on wwan. I tried updating to the latest goldenorb as well, but still no change.

Is there a different place to change the settings?

Set your APN to ipv4 only.. it's a setting under modem->connection profile. If needed, disable the modems ability to auto load apn's via at command.

For local, that's under network->interfaces->lan
And network-> dhcp i think.

Any particular reason to disable ipv6?

Didneywhorl wrote: Thu May 04, 2023 7:55 am Any particular reason to disable ipv6?

Honestly mostly for troubleshooting. I'm having a weird interment issue where webpages aren't loading. Refreshing, sometimes multiple times, fixes it. but it effects services to, like discord, xmpp, ect. because they keep losing connection. At first I thought it was a DNS issue, but it doesn;t appear to be.
My connection has been rock solid for months, before this started. I've got T-Mobile EBS.

I found the setting in Modem > Connection Profile. Thanks for that! I kept overlooking it.