Wireless Joint

I was trying to flash different firmware and now I can not get in to recovery, I try assign ip address ex: 192.168.1.2, 255.255.255.0, 192.168.1.1, with or without dns 192.168.1.1, it does not take me to recovery mode anymore. I try holding the reset button for 15 to 30 sec no luck.

This is when I flash wrong firmware version that was openwrt mesh+

I think the recovery firmware got erase or something, I only see two light power, and l1 lan port,

I also tried with 3 different computer no luck.

I need to fix the recovery firmware please help

Mesh+ doesn't have recovery that I can figure out. They use a custom u-boot that seems to not have it.
You'll likely have to see if the serial ttl port is communicating and try to use that.

Thank you so much for the reply, do you have tutorial on that?

I don't.

But it's pretty common:

I assume you've already tried rescue as described here:
https://fccid.io/2AH9TW826/Users-Manual ... al-2994820 and here
https://openwrt.org/docs/guide-user/tro ... _partition